Installing M.2 Solid State Drives
The motherboard has two M.2 slots for 80-mm NVMe SSDs. The M.2 SSDs are held in place
by a plastic pin inserted in the designated hole in the motherboard.
Installing M.2 Drives
1. Power down the system and remove the top cover as described in Sections 3.1 and 3.2.
2. Find the designated hole in the motherboard (MH10 or MH11) with the securing plastic
pin.
3. Insert the M.2 SSD into the slot (M.2-C1 or M.2-C2) so that it lays flat, then secure it to
the motherboard with the plastic pin.
4. Replace the cover and restore power to the system.
Chapter 3: Maintenance and Component Installation
Mounting Holes with
Plastic Clips
Figure 3-8. Installing the M.2 SSDs
53
M.2 Slots