Input/Output Ports - Supermicro SuperServer SYS-211E-FRN13P User Manual

4.3 Input/Output Ports

See the figure below for the locations and descriptions of the I/O ports on the rear of the
motherboard.
3
1 2 4
5
# Description
1 UID Button
2 Dry Contact
3 LAN1
4 USB6
5 USB7
Note: Only LAN port 10 supports E810 NC-SI.
Unit Identifier Button/UID LED Indicator
A Unit Identifier (UID) button and an LED Indicator are located on the motherboard. The UID
button is located at JUIDB1 on the back panel. The UID LED is located next to the UID button.
When you press the UID button, the UID LED will be turned on. Press the UID button again
to turn off the LED indicator. The UID Indicator provides easy identification of a system unit
that may be in need of service.
Note: UID can also be triggered via IPMI on the motherboard. For more information on IPMI,
please refer to the IPMI User's Guide posted on our website at
support/manuals/.
6 7 8 9
Figure 4-1. I/O Port Locations and Definitions
Rear I/O Ports
# Description
6 SMA5
7 SMA4
8 SMA3
9 SMA2
10 SMA1
UID Button
Pin Definitions
Pin# Definition
1 Ground
2 Ground
3 Button In
4 Button In
Chapter 4: Motherboard Connections
10 11
# Description
11 LAN2/3/4/5
12 LAN6/7/8/9
13 LAN10/11/12/13
https://www.supermicro.com/
UID LED
Pin Definitions
Color Status
Blue: On Unit Identified
64
13
12