Charging (For Electric Versions) - Opel MOVANO Owner's Manual

WARNING! AdBlue ® (UREA) freezes at
temperatures lower than -11 °C.
CHARGING (For
electric versions)
206)
76) 77) 78) 79) 80) 81) 82) 83) 84)
Before charging the high voltage
battery, it is recommended to turn
the ignition device to STOP in order
to obtain a charge until full in the
shortest period possible.
WARNING The brake calliper lock
is activated during the charging
procedure: unlocking will be carried out
automatically at the end of the charging
procedure.
242
CHARGING PORT ON
THE VEHICLE
278
To access the charging port, open the
charging flap fig. 278 by pressing on
the area indicated by the arrow.
Charging port LED
Next to the charging port there are
some LEDs (A) fig. 279 or fig. 280
(according to the versions) that indicate
the charging status by means of four
different colours and related flashing
types:
Blue: to indicate that the system is
waiting for a scheduled charging.
Green flashing: ("Flashing"): during
the charging process:
one flashing green LED
indicates that charging is in
progress;
all 5 green LEDs flashing:
charging process initialisation;
Steady green: to indicate that the
charging process is complete.
Red blinking: ("Blinking"): this
indicates a charging system failure or
when there is a fault in the charging
procedure (when the charging
connector is connected to the charging
port located on the vehicle and
the cable has not been previously
connected to the power socket).
WARNING If all the LEDs are off after
connecting the charging connector to
F1A1057
the charging port on the vehicle, a
problem may have occurred during the
process. In this case it is advisable
to press button (B) in fig. 279 or
fig. 280 and disconnect the charging
connector and reconnect it.