132 Electric Plug For Trailerhitch - Opel Movano X62 2010 Conversion Manualline

OPEL MOVANO (X62)
132 – ELECTRIC PLUG FOR COUPLING
The first-fit electric plug for the coupling and the one available from after-sales are 13-pin type.
Assignment of the pins is standardised.
Electrical switches are built into the plug. They are activated depending on the opening or closing of the
coupling plug hood.
The SW1 switch indicates the presence or absence of the trailer to the vehicle ECUs.
The SW2 switch enables the vehicle ECUs to automatically disconnect the rear fog lamp.
The coupling wiring can be connected to the vehicle in three ways.
- On panel vans with coupling equipment pre-fitted or the "VR2" option: special 10-way intermediate
connector fitted in the rear left pillar.
The trailer coupling wiring is available in the Opel dealer network under part number 93168508 for vehicles
fitted with a rear parking sensor or under part number 93168511 for vehicles not fitted with a rear parking
sensor.
- On panel vans without coupling equipment pre-fitted or the "VR2" option, pick-offs need to be created at
the vehicle's tail light location. Please refer to the "Lights Information" sheet
- On chassis cabs and platform cabs: special 10-way intermediate connector on the rear left of the chassis.
The trailer coupling wiring is available in the Opel dealer network under part number 241570005R.
Comment:
Connecting the coupling plug maintains the service monitoring operation of the vehicle's indicators and
also allows the rear parking sensor to be disabled.
Note: Subject to errors and technical amendments. The electronic version of the body guidelines is the decisive source of
1
up-to-date data on body guidelines (online body guidelines). Data status June 2009