Opel MOVANO Owner's Manual page 414

465
Steering Wheel Seek Buttons
This function can be used to choose
between two options: "Seek
Frequency" and "Seek Preset".
By selecting "Seek Frequency" and
using the steering wheel controls
you can move to the next/previous
frequency.
By selecting "Seek Preset" and using
the steering wheel controls you can
move to the next/previous preset if
Seek Preset is selected.
Restore Default
This function can be used to restore
some default settings.
Turn the BROWSE ENTER button/knob
to select the desired option and then
press the button/knob to confirm the
selection.
A dedicated message will appear on
the display. Select "Yes" to confirm
your choice.
412
REAR CAMERA
(Parkview® Rear Back
Up Camera)
(where provided)
The vehicle may be equipped with a
ParkView® Rear Back Up Camera,
which shows an image of the area
surrounding the rear of the vehicle
fig. 466 on the system display.
F1A2035
466
The camera images can be viewed in
the following cases:
reverse gear is engaged;
when the tailgate is opened;
when the camera is activated
manually via the camera menu.
CAMERA
ACTIVATION/
DEACTIVATION
After activating the camera, it will be
possible to select one of the following
options, fig. 467:
"Manual Activation": to activate
viewing the video camera on the
display of the system;
"Camera Delay": to delay switching
off the camera image when reverse
gear is disengaged;
"Camera with rear door" (for
versions/markets, where provided): to
activate the camera when the tailgate is
opened;
"Camera Guidelines" (for
versions/markets, where provided): to
activate viewing dynamic grids on
the display that show the route of the
vehicle on the screen.
Turn the BROWSE ENTER button/knob
to select the desired category and
then press the BROWSE ENTER
button/knob to confirm the selection.
F1A2030
467
NOTE A beep will be heard when you
engage reverse gear. The volume is
set by default and cannot be adjusted.
F1A2031