Opel MOVANO Owner's Manual page 307

367
At the end of the operation:
take the replaced wheel, reattach it
to the support (E) fig. 366 and tighten
the knob (D);
H
368
fit the assembled tool fig. 365
complete with extension (B) fig. 364
on the screw(A) fig. 364 of the spare
wheel housing manoeuvring device and
turn clockwise to lift the spare wheel
back up until it is fully supported in its
housing beneath the floor pan. Check
that the notch (D)fig .365 indicating that
the device is coupled appears in the
window.
269)
F1A0422
369
For vehicles with alloy rims, proceed as
follows:
carry out the above described
operations for changing the wheel until
loading the punctured wheel on the
spare wheel lifting device;
take the kit from the tool bag, located
in the glove compartment;
G
the kit includes one bracket, three
special screws and one hex wrench, 10
F1A0176
size;
go to the rear side of the vehicle
where the spare wheel is located;
make sure that all of the cable for
the spare wheel lifting device has been
unrolled, grip the bell and position it
inside the circular bracket fig. 370;
370
tighten the knob onto the screw to
secure the bracket fig. 371;
F1A0430
371
rest the bracket on the inside of the
alloy rim fig. 372;
F1A0424
F1A0425
305