Opel MOVANO Owner's Manual page 47

Hide thumbs Also See for MOVANO:
Table of Contents

Advertisement

lift the lever (A) (movement 3), over
the retaining slider (C) fig. 71 (on the
side) which holds the system in raised
position during the operations.
When the base has been locked, it
will be possible to move the seat by
accompanying it with both hands to
move it forwards or backwards fig. 72.
70
71
It will also be possible to disassemble
it by pulling it at the points in which
its catches are free with respect to
the holes in the tracks; in that position
(easily found by sliding the base a little
and simultaneously pulling it out) the
seat can easily be removed fig. 73.
72
F1A0388
73
After the sliding and removal
operations, the seat should be refitted
and secured to the rails on the floor
F1A0389
before driving, as follows:
fit the base on the rails;
push the latch lever downwards
fig. 74 with sufficient force, until the
system locks.
74
F1A0390
WARNING The locking system is only
secured when the safety clip under the
lever locks it horizontally. If this does
not happen, check that the seat is in
the exact locking position in relation
to the rail (moving the seat backwards
or forwards a few millimetres until it is
properly attached). Once the quick-
release base is locked in position, it will
be as in the first stage, in other words
with the retaining lever perfectly parallel
F1A0391
to the floor guaranteeing that the seat
is securely fastened in the selected
position.
The seat can be turned 180º toward
the seat on the opposite side. To turn
it, see the "Seat with revolving base"
paragraph.
F1A0392
45

Advertisement

Table of Contents
loading

Table of Contents