Opel MOVANO Owner's Manual page 406

The display will show information (if
available) about the connected device,
fig. 447, if the pairing was successful.
447
WARNING If the Bluetooth®
connection between mobile phone
and system is lost, consult the mobile
phone handbook.
WARNING You cannot pair a
Bluetooth® device with the vehicle
in motion; a dedicated message will
appear on the system display.
NOTE If the pairing procedure of a
Bluetooth® device fails, a dedicated
message will appear on the system
display. In this case, repeat the
described above pairing procedure.
NOTE The system may change the
track being played by modifying the
name-device in the Bluetooth®
settings of the mobile phone (where
404
provided), if the device is connected via
USB after the Bluetooth® connection.
For proper operation after updating
the mobile phone software, it is
recommended to remove the phone
from the list of devices paired to the
system, delete the previous system
pairing also from the list of Bluetooth®
devices on the mobile phone and make
a new pairing.
CONNECTION/
DISCONNECTION
OF A MOBILE PHONE
F1A2022
OR A Bluetooth® AUDIO
DEVICE
Connection
The system connects automatically
to the paired mobile phone with the
highest priority.
To select a mobile phone or a specific
Bluetooth® audio device, proceed as
follows:
access the "Settings" menu of the
Phone;
turn the BROWSE ENTER
button/knob and select the "Connect"
option;
press the BROWSE/ENTER
button/knob to confirm the selection: a
dedicated screen will appear on the
display.
in the case shown in fig. 450 both
protocols (phone and Bluetooth Audio)
will be connected. The connected
phone is "Mario's Phone" while the
Bluetooth Audio active is "Paolo's
iPhone 6";
in the case shown in fig. 448 the
mobile phone in the second line of the
list shown on the display has both
protocols (phone and Bluetooth Audio)
by pressing the BROWSE/ENTER
button/knob; "Paolo"'s phone will be
connected to the two protocols;
in the case shown in fig. 449 , the
second mobile phone shown in the
list on the display is highlighted: in this
case, the mobile phone is ready to be
connected to both protocols (phone
and Bluetooth Audio). The Bluetooth
Audio active is for the "Paolo's iPhone
6" phone.
448
F1A2060