Opel MOVANO Owner's Manual page 436

I can't talk right now
I will be 5 (or 10, 15, 20, 25, 30, 45,
60) (*) minutes late
(*) Only use the numbers listed,
otherwise the system will not take
the message. When receiving a text
message, the systems also allows the
same message to be forwarded.
NOTE For details on how to send a text
message using the voice commands,
refer to the dedicated paragraph.
ENDING A CALL
Press the graphic button
(A) fig. 495 on the display or the same
button on the steering wheel controls
to end a call in progress.
Only the ongoing call is ended and any
call held becomes the new active call.
Depending on the type of mobile
phone, if the ongoing call is ended by
the caller, the call held may not be
activated automatically.
495
434
PHONE SETTINGS
The phone settings can be accessed
by pressing the "Device Manager"
graphic button (A) and then "Settings".
This function allows you to interact
using some settings provided on the
vehicle. Some examples follow.
The settings that are present but
greyed out cannot be selected.
Set as default
Enable text messaging
Auto connect as second phone
Delete phonebook data
Activate Bluetooth ® audio
Enable projection
Charge only mode
Do not disturb
Disconnect device
Delete device
The"Do not disturb" function has
a submenu from which you can
customise the automatic reply in case
of an incoming call or message or both.
BLUETOOTH ® MODE
This mode is activated by pairing a
Bluetooth ® device containing music
tracks with the multimedia system.
F1A0813
PAIRING A BLUETOOTH ®
AUDIO DEVICE
The pairing of a Bluetooth ® device
(e.g. a smartphone) is done via the
"Device Manager" function on the
"Phone" page (A) fig. 496.
496
Proceed as follows to pair a device
activate the Bluetooth ® function on
the device
access the "Device Manager"
function
press the "Add Device" button
a popup window shows the
temporary PIN to be entered in the
device: find the multimedia system on
the Bluetooth ® audio device
when requested by the audio device,
enter the PIN code shown on the
system display or confirm on the device
the PIN displayed on the device
if the pairing procedure is completed
successfully, a screen is displayed.
Answer "Yes" to the question to pair
F1A0815