Opel MOVANO Owner's Manual page 160

the front detection zone of the vehicle,
fig. 186.
Operating Mode
The Forward Crossing Alert system
can be activated/deactivated by
operating on the display Menu,
or via the multimedia system (for
further information see the dedicated
supplement). To turn the system on/off
using the display menu, access the
Setup Menu by pressing the MODE
button on the dashboard and scroll
through the list of settings using the
or fig. 188 buttons.
188
Select "Forward Crossing Alert". The
available methods are:
OFF
ON (VISUAL & ACOUSTIC)
"Forward Crossing Alert" with
"Visual & acoustic" mode
When this mode is active, the Forward
Crossing Alert system sends a visual
158
warning on the instrument panel that
alerts you to the presence of any
pedestrians or cyclists in the front
blind zone. If pedestrians or cyclists
are present in the detection zone, the
system can also provide a visual and
acoustic warning if a risk of collision is
also assessed.
Deactivation
The Forward Crossing Alert system
can be switched off by selecting OFF
mode. When deactivated, it will emit
neither sound nor display signals. The
Forward Crossing Alert system will be
automatically reactivated whenever the
engine is started.
Blind Spot Information
System (BSIS) (front
blind spot detection)
The BSIS system warns the driver
about the presence of cyclists in the
detection zone by lighting up, on the
passenger side, the warning light
located on the door mirror, along with
F1A0637
an acoustic warning and alert on the
instrument panel.
Sensors
The BSIS system sensor is activated
when the vehicle is running, when
any gear other than reverse gear is
engaged, and at a speed of 30 km/h
or less. The sensor is temporarily
deactivated with the vehicle in reverse
gear.
Warnings
The BSIS system does not signal
the presence of fixed object (e.g.
safety barriers, poles, walls, etc.)
and pedestrians. However, in some
circumstances, the system may
activate in the presence of these
objects and people. This is normal
and does not indicate a system
malfunction.
For the system to operate correctly,
the front side wheel arch zone on
passenger side must stay free from
snow, ice and dirt gathered from the
road surface. This zone must not be
covered with any kind of object (e.g.
stickers, etc.).
Detection in the side zone
(passenger side)
The BSIS system detects cyclists
entering and passing through the side
detection zone of the vehicle on the
passenger side, fig. 186.
Operating Mode
The BSIS system sends a
visual warning to the side mirror
corresponding to the passenger side
that warns of the presence of cyclists in
the side blind spot. The system can
also provide a visual and acoustic