Supermicro X13DEG-PVC User Manual page 12

Super X13DEG-PVC User's Manual
Quick Reference Table
Jumper Description
JBT1 CMOS Clear
JVRM1 BMC I²C/SCL to VRM
JVRM2 BMC I²C/SDA to VRM
LED Description
LED4, LED7 M.2 Activity LED
LED6 (UID-LED) Unit Identifier (UID) LED
LEDBMC BMC Heartbeat LED
LEDPWR Power LED
Connector
Battery (BT1)
BP-PWR1/2/3/4/5/6
(JPW21/22/23/24/25/26)
FAN9, FAN10,
JPMB_FAN1
GPU-PWR1/2/3/4/5/6
(JPWR1/2/3/4/5/6);
GPU-PWR15/16/17/18/19/20
(JPWR15/16/17/18/19/20)
J35 (USB2/3)
JF1
JFP2
JIPMB1
JNCSI1
JNCSIBF3
JNVI2C1
JNVVPP1
JPRG1
JS1 (I-SATA 0-3)
JS2 (I-SATA 4-7)
JSLOT1
JSYSID1
JSYSID2
JTPM1
M.2-P1 (JM2_1),
M.2-P2 (JM2_2)
Default Setting
Open (Normal)
Pins 1-2 (Closed)
Pins 1-2 (Closed)
Status
Blinking Green: Device Working
Solid Blue: Unit Identified
Blinking Green: BMC Normal (Active),
Solid Green: During BMC Reset or during a Cold Reboot
LED On: Onboard Power On
Description
Onboard Battery
Backplane Power Connectors
4-pin Cooling Fan Headers
GPU Power Connectors
USB 2.0 Header (supports up to two USB connections)
Front Control Panel Header with I²C
VGA Connector (supports VGA connections for 4U chassis only)
4-pin BMC External I C Header
2
Network Controller Sideband Interface (NC-SI) Connector
BF-3 Card NC-SI Connector
Header for NVMe I C
2
Header for VPP I C
2
Connector reserved for manufacturer use for onboard Complex
Programmable Logic Device (CPLD) firmware programming
SlimSAS (MCIO) Connector with support of four Intel PCH SATA 3.0
connections (RAID 0/1/5/10 supported)
SlimSAS (MCIO) Connector with support of four Intel PCH SATA 3.0
connections (RAID 0/1/5/10 supported)
Used for the I/O riser card to provide connections of one dedicated BMC
LAN, two USB 3.0 ports, one VGA header, one COM header, and dual 1 G
or 10 G (redundant only) ports
System SKU Identifier Header 1
System SKU Identifier Header 2
Trusted Platform Module (TPM)/Port 80 Connector
PCIe 3.0 x2 NVMe M.2 Slots (with support of M-Key 2280 and 22110)
12