Supermicro X13DEG-PVC User Manual page 144

Super X13DEG-PVC User's Manual
•
TCP Port
•
Boot LUN
•
iSCSI Name
•
CHAP ID
•
CHAP Secret
Power Configuration
Advanced power settings
Select Enabled to enable additional configurable power settings parameters. The options
are Disabled and Enabled.
Slot power limiter (availeble when "Advanced power settings" is set to Enabled)
Select Enabled to enable slot power limiter. When this feature is disabled, the device is
allowed to consume more than 25W from PCIe power rails. The options are Disabled and
Enabled.
Device Level Configuration
Virtualization Mode
Use this feature to specify the type of virtualization used by the controller on all ports. The
options are None and SR-IOV.
PCI Virtual Functions ADvertised
Use this feature to configure the number of virtual Functions supported on this device. The
default option is 8.
Blink LEDs
Use this feature to specify the number of seconds the LEDs on physical network port should
blink to assist with port identification. The default option is 0.
Device Name
This option displays the official product name of the device.
Chip Type
This option displays the Chip Type.
PCI Device ID
This option displays the PCI Device ID of the controller.
144