The following firmware family version information is displayed:
•
CHAP ID
•
CHAP Secret
Secondary Device
Secondary Device
Use this feature to input secondary device MAC address.
Use Independent Target Portal
Select Enabled to enable the use of independent target portal when multi-path I/O is
enabled. The options are Disabled and Enabled.
Use Independent Target Name
Select Enabled to enable the use of independent target name when multi-path I/O is
enabled. The options are Disabled and Enabled.
Blink LEDs
Use this feature to identify the physical network port by blinking the associated LED indicators.
The default setting is 0 (up to 15 seconds).
The following information is displayed:
•
Link Status
•
Physical Link Speed
•
Chip Type
•
PCI Device ID
•
Bus:Device:Function
•
Permanent MAC Address
•
Virtual MAC Address
Restore Defaults
Use this feature to reset the adapter to factory defaults.
Intel(R) Ethernet Server Adapter X520-1 - (MAC address)
139
Chapter 4: UEFI BIOS