Supermicro X13DEG-PVC User Manual page 149

Intel I350 Gigabit Network Connection - (MAC address)
NIC Configuration
Link Speed
Use this feature to set the connection speed of a LAN port specified by the user. The options
are Auto Negotiated, 10 Mbps Half, 10 Mbps Full, 100 Mbps Half, and 100 Mbps Full.
Wake On LAN
If this feature is set to Enabled, the LAN port specified by the user will be enabled when
the system is powered on. The options are Disabled and Enabled.
Blink LEDs
Use this feature to identify the physical network port by blinking the associated LED indicators.
The default setting is 0 (up to 15 seconds).
The following port configuration information is displayed:
•
UEFI Driver
•
Adapter PBA
•
Chip Type
•
PCI Device ID
•
PCI Bus:Device:Function
•
Link Status
•
Factory MAC Address
•
Alternate MAC Address
TLS Authenticate Configuration
This submenu allows you to configure Transport Layer Security (TLS) settings.
Server CA Configuration
This feature allows you to configure the client certificate that is to be used by the server.
Enroll Certification

This feature allows you to enroll the certificate in the system.
149
Chapter 4: UEFI BIOS