Table of Contents
Advertisement
Priority of HTTP Boot
Instance of Priority 1 (Available when your motherboard supports this feature)
This feature sets the rank target port. The default setting is 1.
Select IPv4 or IPv6
This feature specifies which connection the target LAN port should boot from. The options
are IPv4 and IPv6.
Boot Description
Use this feature to enter a boot description, which cannot be longer than 75 characters. Please
be suer to enter a boot description; otherwise, the boot option for the URI cannot be created.
Boot URI
Enter a Boot Uniform Research Identifier (URI) with 128 characters or shorter. This Boot URI
determines how IPv4 Boot Option and IPv6 Boot Option will be created. This feature is only
supported on Dual or EFI Boot Mode.
Instance of Priority 2 (Available when your motherboard supports this feature)
This feature sets the rank target port. The default setting is 0.
Broadcom BCM57414 -(MAC address)
Note 1: This feature is available when "Onboard LAN Option ROM Type" is set to EFI.
Note 2: The Ethernet controller and MAC addresses shown above are based on you
system configurations.
Firmware Image Menu
The following firmware family version information is displayed:
•
Family Firmware Version
•
Boot Code
•
MBA
•
EFI
•
iSCSI Boot
•
CCM
•
NCSI
•
RDMA FM
133
Chapter 4: UEFI BIOS
Advertisement
Table of Contents
