Table of Contents
Advertisement
Super X13DEG-PVC User's Manual
IIO-PCIE Express Global Options
----------------------------------------------------------------
PCIe ASPM Support (Global)
Select Enabled to enable ASPM (Active State Power Management) support for a device installed in a PCIe drive specified
by the user. The options are Disable and Auto.
PCIe Max Read Request Size
Use this feature to set requested Max Read Request Size in PCI hierarchy. "Default" keeps hardware default. The options
are Auto, 128B, 256B, 512B, 1024B, 2048B, and 4096B.
Equalization Bypass To Highest Rate
When this feature is set to Enable, the Equalization Bypass will be supported at the highest rate. The options are Disable
and Enable.
IIO eDPC Support (Available when your system supports this feature)
Use this feature to configure the setting for IIO Enhanced Downstream Port Containment (eDPC) support for your system
in an effort to improve the error containment capacity within the PCIe subsystem when an uncorrected error is detected
either at the root port or at the switch downstream port. Select Disable to disable IIO eDPC support. Select On Fatal Er-
ror to enable IIO eDPC support in your system when a fatal error occurs. Select On Fatal and Non-Fatal Error to enable
IIO eDPC support when an error, fatal or non-fatal, has occurred. The options are Disable, On Fatal Error, and On Fatal
and Non-Fatal Errors.
CXL Security Level
Use this feature to configure how the CXL device can get access on CXL.$. Fully Trusted: CXL Device can get access
on CXL.$ for host-attached and device attached memory ranges in the WB address space; Partially Trusted: CXL Device
can get access on CXL.$ for device attached memory ranges only; Untrusted: All request on CXL.$ will be aborted by
the system. The options are Fully Trusted, Partially Trusted, Untrusted, and Auto.
CXL Header Bypass
Select Enable to enable the CXL header bypass. The options are Disable and Enable.
South Bridge
The following information is displayed:
•
USB Module Version
•
USB Devices:
Legacy USB Support
Select Enabled to support onboard legacy USB devices. Select Auto to disable legacy
support if there are no legacy USB devices present. Select Disabled to have all USB
devices available for EFI applications only. The options are Enabled, Disabled, and Auto.
114
Advertisement
Table of Contents
