Supermicro X13DEG-PVC User Manual page 132

Super X13DEG-PVC User's Manual
Super-Guardians Configuration
Super-Guardians Protection Policy
Use this feature to select the devices that you want to protect by using the Super-Guardians
Policy. The options are: Storage, System, and System and Storage.
KMS Security Policy
When this feature is set to Enabled, passwords will be installed to protect the system and
storage devices as specified, and these passwords will be required to unlock the system or
devices. When this feature is set to Disabled, there will be no passwords used to protect the
system and storage devices. The options are Disabled and Enabled.
KMS Server Retry Count
Use this feature to specify how many times of the connection retry should the KMS server
attempt before quitting. The valid range is 0 - 10. Press "+" or "-" on your keyboard to change
the value. The default setting is 5 (retrying five times).
TPM Security Policy
When this feature is set to Enabled, passwords will be installed to protect the system and
storage devices as specified, and these passwords will be required to unlock the system or
devices. When this feature is set to Disabled, there will be no passwords used to protect the
system and storage devices. The options are Disabled and Enabled.
Load Authentication-Key
Select Enabled to allow the BIOS to load the Authentication-Key (File name: TPMAuth.bin)
from USB storage devices at next system boot. The options are Disabled and Enabled.
USB Security Policy
When this feature is set to Enabled, passwords will be installed to protect the system and
storage devices as specified, and these passwords will be required to unlock the system or
devices. When this feature is set to Disabled, there will be no passwords used to protect the
system and storage devices. The options are Disabled and Enabled.
HTTP Boot Configuration

HTTP Boot Policy
Use this feature to set the HTTP boot policy. The options are Apply to all LANs, Apply to
each LAN, and Boot Priority #1 instantly.
HTTPS Boot Checks Hostname
Enable this feature for HTTPS boot to check the hostname of the TLS certificates to see if it
matches the host name provided by the remote server. The options are Enabled and Disabled
(WARNING: Security Risk!!).
132