Supermicro X13DEG-PVC User Manual page 56

Super X13DEG-PVC User's Manual
Removing the Processor from the Processor Carrier Assembly
Once you have removed the processor carrier assembly from the PHM, you are ready to
remove the processor from the processor carrier by following the steps below.
1. Unlock the lever from its locked position and push the lever upwards to disengage the
processor from the processor carrier as shown in the drawings on the right below.
Processor Carrier Assembly (SP XCC, Carrier E1A)
Processor Carrier Assembly (SP MCC, Carrier E1B)
2. Once the processor is loosened from the carrier, carefully remove the processor from
the processor carrier.
Note: Please handle the processor with care to avoid damaging the processor and
its pins.
SP XCC Xeon Max
56
Lever
Lever
SP MCC