CHAP Mutual Authentication (available when "CHAP Authentication" is set to
Enabled)
To use mutual CHAP authentication, specify an initiator secret on the Initiator Parameters
page and configure that secret on the target. The options are Disabled and Enabled.
IP Version
This option displays whether IPv4 or IPv6 network addressing will be used for iSCSI initiator
and targets.
iSCSI Initiator Parameters
The following information is displayed:
•
IP Address
•
Subnet Mask
•
Default Gateway
•
Primary DNS
•
iSCSI Name
•
CHAP ID
•
CHAP Secret
•
IPv6 Address
•
IPv6 Default Gateway
•
IPv6 Primary DNS
•
IPv6 Prefix Length
iSCSI Name
Use this feature to specify the initiator iSCSI Qualified Name (IQN).
iSCSI First Target Parameters
The following information is displayed:
•
Connect
•
IP Address
•
IPv6 Address
143
Chapter 4: UEFI BIOS