Supermicro X13DEG-PVC User Manual page 134

Super X13DEG-PVC User's Manual
Device Configuration Menu
Multi-Function Mode
Use this feature to configure NIC Hardware Mode. Switching from multi-function to single
function will clear Virtual Function Values in the extended partitions. The options are SF
(Single Function) and NPAR 1.0. (Advanced NPAR option is a feature preview only)
SR-IOV
Select Enabled to enable Single Root I/O Virtualization. The options are Disabled and
Enabled.
Number of MSI-X Vectors per VF
Use this feature to configure the number of MSI-X Vectors per VF. The valid range is 0
-128. The default value is 16.
Maximum Number of PF MSI-X Vectors
Use this feature to configure the maximum number of PF MSI-X Vectors. The valid range
is 0 - 512 per controller. The default value is 74.
Link FEC
Use this feature to configure Link Forward Error Correction Mode. The options are Disabled,
CL74 - Fire Code, CL91 - Reed Solomon, and CL74 & CL91 - Both.
Operational Link Speed
Use this feature to configure the default link speed for the selected port. The options are
AutoNeg (Auto Negotiated), 1Gbps, 10Gbps and 25Gbps.
Support RDMA
Select Enabled to enable RDMA Support for selected port. The options are Disabled and
Enabled.
DCB Protocol
Use this feature to configure DCB Protocol for the system. The options are Disabled,
Enabled (IEEE only), CEE (only), Both (IEEE preferred with fallback to CEE).
LLDP nearest bridge
Select Enabled to enable LLDP nearest bridge state for the system. The options are
Disabled and Enabled.
Auto-negotiation Protocol
Use this feature to configure the protocol used during auto-negotiation. The options are
(IEEE and BAM), (IEEE and Consortium), (IEEE 802.3by), BAM Only, and Consortium
Only.
134