Supermicro X13DEG-PVC User Manual page 145

PCI Address
This option displays the PCI Address of the card.
Link Status
This option displays the phsycial link status of the network port as reported by the controller.
Link Speed
This option displays the physical link status of the network port as reported by the controller.
MAC Address
This option displays the permanent MAC address assigned during manufacturing.
Virtual MAC Address
This option displays the virtual MAC address of the controller.
Socket Direct Operation
This option indicates whether Socket Direct functionality is enabled.
Nvidia Network Adapter - (MAC address)
Firmware Image Properties
The following information is displayed:
•
Family Firmware Version
•
EFI Version
NIC Configuration
Banner Message Timeout
Use this feature to specify the number of seconds that the OptionROM banner will be
displayed during POST. The default setting is 4.
Legacy Boot Protocol
Use this feature to set a legacy network boot protocol. The options are None, PXE, iSCSI,
PXE without faile-over, and iSCSI without fail-over.
IPv4/IPv6 support
Use this feature to select whether IPv4 or IPv6 network addressing will be used for iSCSI
initiator and targets. The options are IPv4, IPv6, and IPv4/IPv6.
145
Chapter 4: UEFI BIOS