Wake On LAN
If this feature is set to Enabled, the LAN port specified by the user will be enabled when
the system is powered on. The options are Disabled and Enabled.
Blink LEDs
Use this feature to identify the physical network port by blinking the associated LED indicators.
The default setting is 0 (up to 15 seconds).
The following information is displayed:
•
UEFI Driver
•
Adapter PBA
•
Device Name
•
Chip Type
•
PCI Device ID
•
PCI Address
•
Link Status
•
MAC Address
•
Virtual MAC Address
Mellanox Network Adapter - (MAC address)
Firmware Image Properties
The following information is displayed:
•
Family Firmware Version
•
EFI Version
NIC Configuration
Banner Message Timeout
Use this feature to specify the number of seconds that the OptionROM banner will be
displayed during POST. The default setting is 4.
141
Chapter 4: UEFI BIOS