Supermicro X13DEG-PVC User Manual page 136

Super X13DEG-PVC User's Manual
Setup Key Stroke
Use this feature to configure key strokes to invoke configuration menu. The options are
Ctrl-S and Ctrl-B.
Banner Message Timeout
Use this feature to specify the number of seconds that the OptionROM banner will be
displayed during POST. The default setting is 7.
VLAN Mode
Select Enabled to enable Virtual LAN Mode for the system. The options are Disabled and
Enabled.
VLAN ID (1-4094) (available when "VLAN Mode" is set to Enabled)
Use this feature to configure the virtual LAN ID. The default setting is 1.
Boot Retry Count
Use this feature to select the number of boot retries. The options are No Retry, 1 Retry, 2
Retries, 3 Retries, 4 Retries, 5 Retries, 6 Retries, and Indefinite Retries.
iSCSI Boot Configuration Menu
iSCSI General Parameters
TCP/IP Parameters via DHCP
Select Enabled to enable the system to acquire TCP/IP configuration via DHCP. The options
are Disabled and Enabled.
iSCSI Parameters via DHCP
Select Enabled to enable the system to acquire iSCSI parameters via DHCP. The options
are Disabled and Enabled.
CHAP Authentication
Select Enabled to enable CHAP Authentication. The options are Disabled and Enabled.
Boot to iSCSI Target
Select Enabled to enable the system to boot to iSCSI target after logon. The options are
Disabled, Enabled, and One Time Disabled.
DHCP Vendor ID
Use this feature to configure DHCP vendor ID (up to 32 characters long).
136