Table of Contents
Advertisement
•
Select Security Erase - Without Password to use the manufacturer default password
"111111111" as the user password which will allow you to erase all data stored in the HDD/
SSD device by using this default password.
The options are Disable, Set Password, Security Erase - Password, Security Erase - PSID,
and Security Erase - Without Password.
Note 1: The option of Security Erase - PSID is based on the storage device support.
The section below provides instructions on how to configure the Security Function
options.
Note 2:
For more information on Secure Erase instructions, please refer to the Secure
Erase Instructions User's Guide posted on the web page under the link:
supermicro.com/manuals/other/X11_X12_X13_B11_B12_B13_H11_H12_BH12_H13_
Secure_Erase_Guide.pdf.
Password
Use this feature to set the SATA user password which allows you to configure the Supermicro
Security Erase settings by using the SATA user password.
Lockdown Mode (Available when the DCMS key is activated)
Select Enabled to support Lockdown Mode that will prevent the existing data or keys stored
in the system from being altered or changed in an effort to preserve system integrity and data
security. The options are Disabled and Enabled.
HDD Security Configuration:
P4: (Storage Device Name)
This section is available when the storage device is detected by the BIOS. Select this device.
Press <Enter> and the following information is displayed:
•
HDD Password Description:
•
HDD PASSWORD CONFIGURATION:
•
Security Supported:
•
Security Enabled:
•
Security Locked:
•
Security Frozen:
•
HDD User Pwd Status:
•
HDD Master Pwd Status:
165
Chapter 4: UEFI BIOS
https://www.
Advertisement
Table of Contents
