Test Jacks; Leds - Paradyne 3172 Operator's Manual

ACCULINK 3172 and 3174 E1 DSU/CSU
The scroll keys ( and
depending on whether a menu screen or a data entry
screen appears on the front panel.
For data entry screens, the
character to the left while the
character to the right.
For menu screens, the
menu choice while the
choice.
If a choice is available to the left of the screen, the
character appears on the top line. If a choice is
available to the right of the screen, the
appears on the top line. If choices are available to both the
right and the left of the screen, two arrows appear ( ).
The arrows indicate that you must use the scroll keys to
bring the additional options onto the screen.
F1 F2

Test Jacks

Six test jacks are located on the front panel
(Figure 3-4). These are described in the
in Chapter 4, Maintenance.
Figure 3-4. Test Jacks
3-4
) serve one of two functions,
key scrolls one
key scrolls one
key scrolls to the previous
key scrolls to the next menu
character
F3
Test Jacks section

LEDs

There are twelve LEDs on the E1 DSU/CSU front
panel. The five LEDs on the right (Figure 3-5) are shared
between the DTE Drop/Insert port and the data ports.
Refer to the Selecting the DTE Drop/Insert or Data Port
for LED Display section later in this chapter to choose
which port's status the LEDs display.
Figure 3-5. E1 DSU/CSU LEDs
A green LED indicates normal operation. A yellow
LED indicates a warning (for the DTE Drop/Insert port)
or activity (for the data ports). Conditions are sampled
every tenth of a second.
The twelve front panel LEDs are grouped into four
sections to indicate the status of the:
System (Table
NETWORK interface
DTE Drop/Insert Port
Data Ports (Table
March 1999
3-1)
(Table 3-2)
(Table 3-3)
3-4)
3170-A2-GB20-30