Outputting To External Video Devices - Matrox Corona Installation And Hardware Reference

Connecting a monitor

Outputting to external video devices

Matrox Corona works with VGA and high-resolution monitors.
To display the standard video output of Matrox Corona:
1. If your monitor has impedance switches, set the switches
for the red, green, and blue inputs to 75 ohms, as shown in
the illustration below. Set the switches for the
synchronization inputs according to your monitor's manual.
In most cases, these switches should be set to high
impedance and external sync mode.
2. Connect the monitor to Matrox Corona's 15-pin female
video-output connector (DB-15). If your monitor has a
DB-15 connector, use the standard DB-15 to DB-15 cable
that is usually provided with your monitor. If your monitor
has 5 BNC-type connectors, use the standard DB-15 to
5-BNC cable that is usually supplied with such monitors.
Connecting external devices 27