What You Need To Get Started - Matrox Corona Installation And Hardware Reference

What you need to get started

To begin using Matrox Corona, you need the following:
PC with a PCI bus and a Pentium processor or better.
When running Windows 95, 16 Mbytes of RAM are required;
when running Windows NT 4.0, 24 Mbytes of RAM are
required; when running DOS, 4 Mbytes of RAM are required.
These are minimum requirements.
To attain full Matrox Corona functionality, we recommend
systems that use newer PCI chipsets, such as the Intel
430HX, 430VX, 430TX, 440FX, 440LX, 440BX, because they
generally offer better performance in terms of data transfer
rates.
A PC with an empty full length 32-bit PCI expansion slot (bus
master capable). A second slot (ISA or PCI) is required if you
plan to install the companion digital-input board.
A CD drive, and a hard disk or network drive on which to
install the Matrox Corona software.
What you need to get started 15