Light Emitting Diodes (Leds) - Matrox 4Sight XV6 Installation And Hardware Reference

54 Appendix B: Technical reference

Light emitting diodes (LEDs)

There are a total of six LEDs on the Matrox 4Sight XV6 unit.
Front panel LEDs
H DD LED
Power LED
The following table describes the LEDs of each connector:
LED Description
HDD LED Turns green when any mass storage drive is active.
Power LED Turns red when Matrox 4Sight XV6 is receiving power and turned on.
Activity/Link LED Turns on when connected to a network.
Blinks whenever packets are being transmitted or received.
Turns off when no network connection is present.
10/100/1000 LED Turns orange when operating in 100 BaseT mode.
Turns green when operating in 1000 BaseT mode.
Turns off when one of the following conditions is true:
• No network connection is present.
• The unit is operating in 10 BaseT mode. If the unit is operating in 10 BaseT mode,
Back panel LEDs
Activity/Link
Speed LED
the Activity/Link LED will be solid or blinking.
Speed LED
Activity/Link