Accessories - Edwards STP-XF1303 Series Instruction Manual

7.4

Accessories

7
The following is a list of accessories that can be purchased by contacting Edwards.
Items
Instruction Manual (A)
Instruction Manual (B)
Instruction Manual (C)
Instruction Manual (D)
TMS heater cable
TMS sensor cable
*2
TMS valve
STC-U remote cable
Power cable *2
Power extension cable
*1
STP pump consists of the four-volumed Instruction Manuals.
*2
Optional accessory (Each accessory must be ordered separately)
MT-92E-A01-C
Page 38
STC-U eTMS unit
Application purpose
*1
Generic Instruction Manual
*1
Pump Specific Information
*1
Control unit Instruction Manual
applicable to your STP pump
*1
For STC-U eTMS unit
*2
Connection cable between STC-U and
TMS heater of STP pump
*1 Connection cable between STC-U and
temperature sensor of STP pump
TMS valve controls the cooling water
in order to maintain a constant
temperature inside the STP pump
*2
Connection cable between STC-U and
STP control unit
Primary input power
*2
Power extension cable which supplies
power from STC-U to STP control unit
Remarks
This manual
Shielded cable.
Standard cable length is 5 m.
Contact Edwards for further
information. The cable type
varies depending on STP pump
to be connected. Refer to
Instruction Manual (B).
Shielded cable.
Standard cable length is 5 m.
Contact Edwards for further
information.
No shielded cable.
Standard cable length is 5 m.
Contact Edwards for further
information.