General Description; Stc-U - Edwards STP-XF1303 Series Instruction Manual

1.6

General description

STC-U is an external temperature control device for maintaining predetermined part of the STP pump
at the set temperature. When operating the STP pump, connect the STC-U to the STP control unit.
STP control unit can set ON / OFF setting of temperature control function of STC-U, and display the
temperature value on LCD on the STP control unit.
⚫
STC-U consists of four temperature sensor inputs, two water-cooling valve outputs, and two
heater outputs.
⚫
By communicating with the STP control unit, the STC-U operates the pump, and controls the
temperature of the pump
⚫
Only applicable control unit is available.
Note : Applicable pump model label is affixed to the front panel of the STC-U and STP control unit.
Note : TMS unit built in the STP control unit controls one water-cooling valve output and one heater
output with one temperature sensor input. On the other hand, the STC-U can control several
parts of the STP pump to the respective setting temperatures by multiple input and multiple
output.
STC-U eTMS unit
Figure 8 - STC-U
1
MT-92E-A01-C
Page 7