Printer Hardware Specifications And Requirements Summary - Xerox DocuPrint 92C Installation Planning Manual

Ips
Hide thumbs Also See for DocuPrint 92C:
Table of Contents

Advertisement

PRINTER SPECIFICATIONS AND REQUIREMENTS

Printer hardware specifications and requirements summary

Device
Printer with standard
(two-tray) feeder and
dual stacker
Printer with standard
(two-tray) feeder and
stitcher/stacker
Printer with high-
capacity feeder and
dual stacker
Printer with high-
capacity feeder and
stitcher/stacker
CCU
(height measured at
handle)
Bypass transport
6-18
The following table summarizes the specifications and electrical
requirements of your printer hardware components.
For a summary of controller specifications and requirements, refer to
the "Controller specifications and requirements" chapter of this guide.
Contact your service representative if you have questions not
specifically addressed in this guide.
Table 6-8.
Dimensions (depth,
Total
width, height)
Weight
d=35.7 in. / 91 cm
1,454 lbs. /
w=91.8 in. / 233 cm
661 kg
h=41 in. / 104 cm
Total space
required:
164 by 106.5 in. /
417 by 271 cm
d=35.7 in. / 91 cm
1,473 lbs. /
w=89.5 in. / 227 cm
670 kg
h=41 in. / 104 cm
Total space
required:
162 by 106.5 in. /
411 by 271 cm
d=35.7 in. / 91 cm
1,742 lbs. /
w=114.1 in. / 290 cm
792 kg
h=41 in. / 104 cm
Total space
required:
186 by 106.5 in. /
473 by 271 cm
d=35.7 in. / 91 cm
1,761 lbs. /
w=112 in. / 285 cm
801 kg
h=41 in. / 104 cm
Total space
required:
184 by 106.5 in. /
467 by 271 cm
d=30 in. / 76 cm
130 lbs. /
w=16 in. / 41 cm
59 kg
h=37 in. / 94 cm
d=20 in. / 51 cm
35 lbs. /
w=31in. / 79 cm
16 kg
h=13.25 in. / 34 cm
Printer specifications and power requirements
Heat dissipation
60 Hz and 50 Hz:
Operating: 14,980 BTU
per hour
Standby: 9,100 BTU
per hour
Same as standard (two-
tray) feeder and dual
stacker configuration,
above.
Same as standard (two-
tray) feeder and dual
stacker configuration,
above.
Same as standard (two-
tray) feeder and dual
stacker configuration,
above.
N/A
N/A
XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE
Power requirements
60 Hz and 50 Hz:
5.5 KVA max.
(operating mode)
Same as standard (two-
tray) feeder and dual
stacker configuration,
above.
Same as standard (two-
tray) feeder and dual
stacker configuration,
above.
Same as standard (two-
tray) feeder and dual
stacker configuration,
above.
N/A
N/A

Advertisement

Table of Contents
loading

Table of Contents