Printer Hardware Specifications And Requirements Summary - Xerox DocuPrint 100 Installation Planning Manual

Printer hardware specifications and requirements summary

Table 6-11. Printer specifications and power requirements
Dimensions (width,
Device depth, height)
Printer with W=151.2 in / 384 cm
inverter H=59.6 in / 151.3 cm
feeder/stacker D=38.8 in / 98.6 cm
and one
feeder/stacker Total space required
(+ access):
223.25 in W by 114 in
D / 567 cm W by
290.3 cm D
Installation Planning Guide
NOTE: These turning figures are based on inverter/feeder/
stacker dimensions of 28 inches / 71.1 cm by 32.25 inches / 81.9
cm.
The following table summarizes the specifications and electrical
requirements of your printer hardware components.
Total
Weight
2,588 lbs/
1,174.9
kg.
Printer requirements and specifications
Heat dissipation
DP 100, 115, and 60 Hz:
135: DP 100, 115, and
Operating: 135:
28,140 BTU per hr 120/240 VAC or
Standby: 120/208 VAC;
4,454 BTU per hr 50 amp service;
Energy Saver: NEMA L14-50R;
2,700 BTU per hr KVA 7.3 (operating)
DP 155 and 180: DP 155 and 180:
Operating: 120/208 VAC
32,770 BTU per hr (182 V to 220 V),
Standby: KVA 7.3 (operating)
4,454 BTU per hr
Energy Saver: Cord 1: 50 amp,
2,700 BTU per hr NEMA 14-50R
Cord 2: 30 amp,
NEMA 14-30R
50 Hz:
Consult your local
service representative.
Power requirements
6-25