Printer Hardware Specifications And Requirements Summary - Xerox 4050 Installation Planning Manual

Printer hardware specifications and requirements summary

Device
4050/4090 printer:
Standard (two-tray)
feeder and dual stacker
4050/4090 printer:
Standard (two-tray)
feeder and stitcher/
stacker
4050/4090 printer:
High-capacity feeder
and dual stacker
XEROX DOCUPRINT 4050/4090 IPS INSTALLATION PLANNING GUIDE
The following table summarizes the specifications and electrical
requirements of your printer hardware components.
For a summary of controller hardware specifications and
requirements, refer to the "Controller specifications and
requirements" chapter of this guide. Contact your service
representative if you have questions not specifically addressed in this
guide.
Table 6-10.
Dimensions (depth,
width, height) Weight
d=34.5 in. / 87.6 cm 1,272 lbs. /
w=91.5 in. / 232 cm 578 kg
h=41 in. / 104 cm
Total space
required:
163.5 by 106.5 in. /
415 by 271 cm
d=34.5 in. / 87.6 cm 1,274 lbs. /
w=89.5 in. / 227 cm 579 kg
h=41 in. / 104 cm
Total space
required:
161.5 by 106.5 in. /
410 by 271 cm
d=34.5 in. / 87.6 cm 1,560 lbs. /
w=114 in. / 290 cm 709 kg
h=41 in. / 104 cm
Total space
required:
184 by 106.5 in. /
467 by 271 cm
PRINTER SPECIFICATIONS AND REQUIREMENTS
Printer specifications and power requirements—
4050/4090 printer
Heat dissipation
4050 (60 Hz) and
4050 (50 Hz DELTA):
Operating: 11,200 BTU
per hour
Standby: 7,400 BTU
per hour
4090 (60 Hz) and
4090 (50 Hz DELTA):
Operating: 14,980 BTU
per hour
Standby: 9,100 BTU
per hour
Same as 4050/4090
standard (two-tray)
feeder and dual stacker
configuration, above.
Same as 4050/4090
standard (two-tray)
feeder and dual stacker
configuration, above.
Power requirements
4050 (60 Hz):
120/208 VAC or
120/240 VAC, 30 amp
Oper. max: 4.1 KVA
Standby: 2.7 KVA
NEMA 14-30R
4050 (50 Hz DELTA):
200, 230, 240 VAC
(3-phase, 4 wire or
single-phase), 30 amp
Oper. max: 3.8 KVA
Standby: 2.5 KVA
4090 (60 Hz) and
4090 (50 Hz DELTA):
Oper. max: 5.5 KVA
Same as 4050/4090
standard (two-tray)
feeder and dual stacker
configuration, above.
Same as 4050/4090
standard (two-tray)
feeder and dual stacker
configuration, above.
6-17