Default Settings For The Printer Engine - Xerox DocuColor 2060 Maintenance Manual

Guide to Performing Routine Maintenance
7. Default settings for the printer
engine
This chapter explains how to change the default settings for the
printer engine. This feature is available through the Tools mode
on the control panel.
Note the following:
• If you attempt to access the Tools mode while a job is
printing, access to the screens is delayed until the job
completes printing.
• Jobs queue, but do not print, while the Tools mode is active.
• You cannot access the Tools mode if the printer is in a fault
condition.
• You cannot access the Tools mode if the Pause key on the
control panel has been pressed to halt a job. When the job
that was stopped has been completed, Tools mode may be
accessed.
7-1