Auto Resume Stop - Xerox DocuColor 2060 Maintenance Manual

Auto Resume Stop

Guide to Performing Routine Maintenance
Use the Auto Resume Stop timer to automatically restart a job
when the Pause button on the control panel was pressed and the
job is waiting for user instruction.
To set the Auto Resume Stop timer:
1. Access the System Timers screen (refer to the section
"Accessing the timers").
2. On the System Timers screen, touch the Auto Resume Stop
button. The Auto Resume Stop screen displays.
3. Use the up or down arrow buttons to change the time. The
range available is 1 to 10 minutes.
To use the system default time of 2 minutes, touch the
System Default button.
Figure 7-12. Auto Resume Stop screen
4. Touch the Enter button on the screen to enter the new time
into the system.
5. Touch the Close button to return to the Machine Defaults 1
screen, or select another timer to change.
Default settings for the printer engine
7-11