Job Spacing - Xerox DocuColor 2060 Maintenance Manual

Job Spacing

Guide to Performing Routine Maintenance
Use the Job Spacing timer when there are multiple jobs queued
and you would like to allow seven seconds to unload prints from
a finishing device before the next job starts printing.
To set the Job Spacing timer:
1. Access the System Timers screen (refer to the section
"Accessing the timers").
2. On the System Timers screen, touch the Job Spacing
button. The Job Spacing screen displays.
3. Touch the 7 seconds button to enable the feature.
Touch the Off button to disable the feature.
Figure 7-10. Job Spacing screen
4. Touch the Close button to return to the Machine Defaults 1
screen, or select another timer to change.
Default settings for the printer engine
7-9