Setting The System Productivity - Xerox DocuColor 2060 Maintenance Manual

Setting the system productivity

Guide to Performing Routine Maintenance
Use Productivity Setting to optimize the throughput speed for the
type of paper you run most frequently.
To set the Productivity Setting:
1. Access the Tools mode (refer to the section "Accessing the
Tools mode" in this chapter).
2. On the Machine Default 1 screen, touch the Productivity
Setting button. The Productivity Setting screen displays.
Figure 7-14. Productivity Setting screen
3. Select the button for the type of paper you use most
frequently in the printer, or select Auto to use the throughput
speed for the paper weight selected on the paper tray weight
indicator.
• Selecting Auto selects a fuser temperature based on the
paper weight selected in the paper tray, improving
average power consumption, but slower operation while
waiting for the fuser to either heat up or cool down.
• Selecting Light Weight sets the fuser temperature to 160
o C, which optimizes the throughput speed for light weight
papers, and uses lower power consumption.
• Selecting Heavy Weight sets the fuser temperature to
175 o C, which optimizes the throughput speed for heavier
papers, and results in higher power consumption.
4. Touch Close to return to the Machine Defaults 1 screen.
Default settings for the printer engine
7-13