Adjusting The Paper Registration - Xerox DocuColor 2060 Maintenance Manual

Default settings for the printer engine

Adjusting the paper registration

7-16
To set the paper registration for side one/site two:
1. Access the Tools mode (refer to the section "Accessing the
Tools mode" in this chapter).
2. On the Machine Default 1 screen, touch the Paper
Registration Adjustment button. The paper Registration
Adjustment screen displays.
Figure 7-16. Paper Registration Adjustment screen
3. Select either the Side 1 or Side 2 button to adjust the
registration.
Use the Oversize Paper Offset button only for papers larger
than long edge feed, 8.5 by 11 inch or A4 paper. Refer to step
6 if you are using this option.
Guide to Performing Routine Maintenance