Screen Saver - Xerox DocuColor 2060 Maintenance Manual

Default settings for the printer engine

Screen Saver

7-8
Use the Screen Saver timer to protect the screen from being
damaged with permanent marks if the printer is idle for a period
of time.
To set the Screen Saver timer:
1. Access the System Timers screen (refer to the section
"Accessing the timers").
2. On the System Timers screen, touch the Screen Saver
button. The Screen Saver screen displays.
3. Use the up or down arrow buttons to change the time. The
range available is 10 to 60 minutes.
To use the system default time of 10 minutes, touch the
System Default button.
Figure 7-9. Screen Saver screen
4. Touch the Enter button on the screen to enter the new time
into the system.
5. Touch the Close button to return to the Machine Defaults 1
screen, or select another timer to change.
Guide to Performing Routine Maintenance