Simplex print jobs
Duplex print jobs
Guide to Performing Routine Maintenance
NOTE: If you are using drilled tabbed Inserts, you may
experience sporadic jams caused by the holes passing over the
sensors.
Drilled paper
Drilled paper can be run from tray 4 but it is not recommended. If
you choose to run drilled paper from tray 4, follow the
instructions below.
Load the drilled paper into tray 4 with the holes positioned toward
the rear of the paper tray.
Figure 1-11. Loading drilled paper for simplex print jobs
1. Rear of paper tray
2. Front of paper tray
3. Paper tray guides
Load the drilled paper into tray 4 with the holes positioned toward
the front of the paper tray.
Figure 1-12. Loading drilled paper for duplex print jobs
1. Rear of paper tray
2. Front of paper tray
3. Paper tray guides
Feeder trays
1-11