Xerox DocuColor 2060 Maintenance Manual page 21

Guide to Performing Routine Maintenance
• Load the paper seam side (the side where the ream of
paper is sealed) up in tray 3.
Figure 1-2. Paper orientation for tray 3
NOTE: Many suppliers use arrows on the product labels to
indicate the preferred side to image first. Use this side (as
signaled by the arrow) as equivalent to the seam side when
loading the paper.
3. Adjust the paper guides by pressing in the guide release and
carefully moving the Edge Guide until it lightly touches the
edge of the material in the tray.
4. Select the paper weight.
Although the trays have auto size detection capability, the
paper weight (gsm) range must be selected on the Weight
Indicator. Selecting the correct paper weight range affects the
feed performance and image quality. Press the selection
button until the light next to the correct weight is illuminated.
Tray 1 has a chart that converts pounds into gsm for easy
selection, or refer to the conversion tables in the section
"Selecting the paper weight" later in this chapter.
Feeder trays
1-3