Xerox DocuColor 2060 Maintenance Manual page 24

Feeder trays
1-6
2. Wait until the Ready to Open indicator is illuminated.
Figure 1-7. Ready to Open indicator on tray 4 control
panel
3. Open the tray 4 door.
Figure 1-8. Tray 4 door open
4. Remove any remaining sheets from the elevator tray if you
are changing paper stock.
5. Load the paper seam side (the side where the ream of paper
is sealed) up in tray 4.
Load the paper onto the elevator tray with the sheets even
against the front and lead edge registration guides. Do not fill
above the MAX line. Ensure that the side edge and end
guides are against the paper. Incorrect loading of paper can
result in excessive sheet skew, misfeeds, or multiple feeds
due to paper guides not being aligned properly.
Guide to Performing Routine Maintenance