Xerox DocuColor 2060 Maintenance Manual page 43

Guide to Performing Routine Maintenance
4. Pull the cartridge completely out of the compartment.
Dispose of the empty cartridge according to local regulations.
Figure 4-3. Removing a cartridge
Dry ink settles and compacts during shipping and must be
loosened before inserting the cartridge into the machine. Failure
to completely loosen the material may cause damage to the gear
at the end of the cartridge.
5. Remove a new cartridge from the box.
6. Vigorously shake or slap the new cartridge with your hand
until the dry ink is completely loosened. To determine if the
material is loose, place your finger tips on the flat side of the
gear cogs at the back of the cartridge and turn the gear
clockwise. When the gear turns freely, the material is loose
and the cartridge can be inserted into the compartment.
Figure 4-4. Turning the cartridge gear
7. To insert the cartridge into the compartment, align the arrow
on the cartridge with the unlocked padlock on the
compartment and slide the cartridge into the compartment.
CAUTION
Inks
4-3