Xerox 4850 Installation Planning Manual page 84

Controller specifications and requirements
5-6
Figure 5-3. Sun Ultra 60 printer controller hardware
1. Mouse and mouse pad
2. Keyboard
3. Monitor
4. Processor
5. Table
To ensure consistent performance and avoid any damage to
equipment, follow these rules for placing the components of the
Sun Ultra 60 controller.
Do:
• Place the monitor and processor on a desk or table top,
separate from the printer. The monitor should be placed
beside the processor, on the same surface. (The cartridge
tape drive may be placed on top of the processor.)
• Keep the processor in an upright, vertical position as
illustrated below.
• Allow at least 6 inches / 152 mm of unobstructed space at the
front and rear of the processor, so the fan and vents are not
blocked.
Installation Planning Guide