Ccu Changeout Cart - Xerox 4850 Installation Planning Manual

Printer specifications and requirements

CCU changeout cart

6-10
Figure 6-5. Printer with high-capacity feeder and
stitcher/stacker
1. Back of system
2. Front of system
The changeout cart is required for installing and removing the
CCU, which contains the colored dry ink. A cart must also be
used to store any CCUs that are not currently installed in the
printer. Therefore, if you intend to print using more than one dry
ink color, you should have one cart for each CCU.
NOTE: If there is more than one printer at your site, it may not
be necessary to have one cart per CCU. Consult with your site
representative for more information.
Installation Planning Guide