Face-to-face
shared space
Installation Planning Guide
Figure 6-6. Back-to-back shared service area space
1. Printer
2. Operator area
3. General service area
The following figure shows the two printers facing each other.
The printers share 12 inches / 30.5 cm of the general service
space, but not the exclusive operator area in front of each printer.
Therefore, the printers should be separated by 24 inches / 61
cm, plus 24 inches/ 61 cm, plus 12 inches / 30.5 cm. This allows
for the entire operator space for each printer, plus the shared
general service area of
12 inches / 30.5 cm.
Printer specifications and requirements
6-13