Xerox 4850 Installation Planning Manual page 161

DocuPrint NPS/IPS on a Novell network
D-9
a. Sign on to the Novell workstation as a network
administrator.
If you use Novell's Quick Setup feature, you must do the
following after creating the queue and server:
b. From PCONSOLE, create a Printer Queue (for example,
Gazette) and a Print Server (for example, PGazette).
• In the definition of the server, choose Printer Setup.
• Define the printer per the naming convention
suggested by NPS/IPS.
• Select DEFINED ELSEWHERE.
c. From the Print Server window, configure a printer for
PServer using the Printer Configuration option.
d. Type any name (for example, Gazette) for the printer.
Select Remote Other/Unknown type for the printer and
save the information.
e. Define the printer in the Queue Service by highlighting the
printer name (for example, Gazette) and pressing Enter.
f. Press the Insert key to select the Print Queue (for
example, Gazette) you want to bind with PServer (for
example, PGazette).
g. Save the information.
2. When configuring NPS/IPS, answer the configuration
questions as follows:
• Remote Printer for Novell Netware -- <N>
• Use Print Server for Novell Netware -- <Y>
• Name of Novell Print Server -- PGazette
• IPX Internal Network Number [000000##] (assigned by
network administrator)
• IPX number of Connected LAN [000000##] (assigned by
network administrator)
• Token Ring Framing type -- TOKENRING (or
TOKENRING_SNAP)
3. After installation, change from PSERVER to RPRINTER as
follows:
a. Sign on to privilege as an administrator.
CAUTION
Installation Planning Guide