Page 1 Xerox DocuPrint 92C IPS Installation Planning Guide Version 7.1 $XJXVW 2000 721P89200...
Page 2 Xerox The Document Company, the stylized X, and all Xerox ·, product names mentioned in this publication are trademarks of Xerox Corporation. Products and trademarks of other companies are also acknowledged. Changes are periodically made to this document. Changes, technical inaccuracies, and typographic errors will be corrected in subsequent editions.
Page 3: Laser Safety
The laser danger labels on the system are for Xerox service representatives and are on or near panels or shields that must be removed with a tool. DO NOT REMOVE LABELED PANELS OR PANELS NEAR LABELS.
Page 4 • Always use materials and supplies specifically designed for your Xerox equipment. Use of unsuitable materials may result in poor performance and may create a hazardous situation. • Never move either the printer or the Printer Controller without first contacting Xerox for approval.
Page 5: Table Of Contents
3. Printer components and options Printer components Printer options Bypass transport option 4. Preparing for installation Responsibilities XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE Table of Contents Contents Conventions DocuPrint Model 92C IPS hardware features NPS/IPS Dual Mode Sixth Sense...
Page 6 Outlet configurations Printer outlet voltages—60 Hz Printer outlet voltages—50 Hz Printer placement CCU changeout cart Clearance space requirements Shared space Floor leveling Delivery access requirements XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE 6-10 6-11 6-11 6-11 6-15 6-15 6-18 6-19...
Page 7 AIX procedures VM sample definitions VSE sample definitions E. Defining the printer to the host: TCP/IP attachment MVS or OS/390 parameters XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE Routine maintenance Meter reading and reporting Selecting paper Paper care Dry ink...
Page 8 3. Define the printer to PSF/2 4. Define a PSF/2 print queue for the printer (optional) 5. Test the printer connection in OS/2 Correcting for printer performance issues – OS/2 References – OS/2 XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE E-11 E-14 E-16 E-17...
Page 9: Printer Components And Options
Xerox DocuPrint printing system. This guide is intended for the person responsible for coordinating the installation of the Xerox DocuPrint 92C Highlight Color Laser Printing System at your site. It lists the tasks you must complete before installation can begin, as well as your responsibilities during the installation.
Page 10 Ä This publication may contain descriptions of concepts and features not currently available for your Xerox printing system. Consult your Xerox sales representative or your operating system software program description for additional information. XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE...
Page 11: Product Overview
IBM IPDS Group 3 page printer with the AFIG (Advanced Function Image and Graphics) option. The IPS printer series is a combination of proven Xerox print engines matched with a high-performance RISC-based controller. Each system consists of a Sun workstation controller and the printer, sometimes referred to as the Image Output Terminal (IOT).
Page 12 DocuPrint Model 92C IPS: channel-attached configuration Host Host system (PC or mainframe) DocuPrint Model 92C IPS printer Printer interface cable (DCIM2) Sun workstation controller SCSI interface Host Channel Unit (HCU) Bus and tag cables XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE...
Page 13: Docuprint Model 92C Ips Hardware Features
DocuPrint Model 92C IPS hardware features XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE Figure 1-2. DocuPrint Model 92C IPS: TCP/IP configuration Host system (PC or mainframe) Token Ring or Ethernet network connection Sun workstation controller Printer interface cable (DCIM2) DocuPrint Model 92C IPS printer For information on the various IPS printer configuration options, refer to the “Printer components and options”...
Page 14 (For further information on this option, refer to the “Bypass transport specifications” appendix of this guide.) • Sixth Sense Remote Service — The Xerox Sixth Sense Remote Service feature allows Xerox support personnel to access IPS/NPS controller via modem from a remote location.
Page 15: Nps/Ips Dual Mode
Refer to the Xerox DocuPrint IPS/NPS Dual Mode Switching Instructions and other Xerox DocuPrint IPS documentation for more information. Sixth Sense is a unique suite of diagnostic tools that allows Xerox customer service engineers, analysts, and consultants to serve customers more effectively.
Page 16: Base System Components
The printer also provides paper stacking, collating, and optional finishing capabilities you enable using the IPS application software accessed through the graphical user interface. XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE...
Page 17: Controller Hardware
Controller hardware Sun Ultra 2 workstation XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE 2Controller components and The printer controller provides the printer with print data and commands, and receives status information from the printer. This chapter describes the components and options available for the controller.
Page 18: Controller Components And Options
The diskette drive is located in the processor, on the right front section for the Ultra 2. XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE...
Page 19 Display monitor XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE CONTROLLER COMPONENTS AND OPTIONS • CD-ROM drive: The CD-ROM drive is a high density, read-only, optical laser storage device used for loading the IPS operating system and other files. The CD-ROM drive is located in the processor above the diskette drive.
Page 20: Controller Hardware
Diskette, CD-ROM, and cartridge tape drives • Connectivity board for Ethernet and, optionally, Token Ring • A Data Control Interface Module (PDCIMu) card installed in the processor to interface with the print engine. XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE...
Page 21: Sun Ultra 60 Workstation
Processor XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE CONTROLLER COMPONENTS AND OPTIONS Figure 2-3. Components of the Sun Ultra 60 workstation Monitor Keyboard Mouse Processor Diskette drive CD-ROM drive Cartridge tape drive The 256 MB RAM processor is the central processing unit of the Sun Ultra 60 workstation.
Page 22 Back panel: The back panel of the processor has a power receptacle and outlet, connectors, connector openings, and ports. The following figure shows the back panel of the Sun Ultra 60 workstation that is a part of your IPS controller. XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE...
Page 23 Display monitor Keyboard XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE CONTROLLER COMPONENTS AND OPTIONS Figure 2-5. Back panel of the Sun Ultra 60 processor Power inlet Fan vent Online interface (if configured) Differential SCSI PWB (optional) Printer connector (PCI66 1)
Page 24 If the mouse has a roller ball instead of an optical sensor underneath, it requires a non-metallic pad. Note: Printer controller hardware configurations are subject to upgrade. XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE...
Page 25: Ips User Interface Screen
IPS user interface screen XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE CONTROLLER COMPONENTS AND OPTIONS The graphical user interface allows you to interact with the printer and to monitor its interaction with the various components. During a print job, printer error messages may display to notify you of any unexpected conditions.
Page 26: Host Channel Unit (Hcu)—Channel-Attached Systems Only
10 amps on the 5 volt output. Note: The customer is responsible for obtaining, stringing, and maintenance of the bus and tag cables. The bus and tag cables must be fully populated cable sets. XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE...
Page 27: Printer Components
Printer components XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE 3Printer components and The printer processes the electronic data and images received from the controller and produces the printed report. This chapter describes the components and options available for the printer.
Page 28 Sample tray Stacker tray 1 Stacker tray 2 Feeder tray 1 Feeder tray 2 Refer to the Product Reference manual for a detailed description of the features and operation of the printer components. XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE...
Page 29: Printer Control Console
Printer control console XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE PRINTER COMPONENTS AND OPTIONS The printer control console contains message and graphic displays as well as status indicator lights that alert you to printer conditions, paper jams, and other fault and status conditions (such as low dry ink).
Page 30: Printer Options
4), increasing the feeder capacity by approximately 2,000 sheets. Figure 3-3. Xerox DocuPrint 92C with high-capacity feeder High-capacity feeder module Feeder tray 3 Feeder tray 4 Each high-capacity feeder tray holds 1,000 sheets of 20-pound or 80 gsm bond paper. XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE...
Page 31: Dual Stacker
Paper sizes Dual stacker Tray capacities XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE PRINTER COMPONENTS AND OPTIONS Both high-capacity feeder trays handle paper sizes from 8 by 10 inches / 203 by 254 mm to 8.5 by 14 inches / 216 by 356 mm. This range includes international paper size A4 (8.27 by 11.16 inches /...
Page 32: Stitcher/Stacker
Up to 2,000 sheets of 20-pound or 80 gsm bond, unstitched • Up to 200 two-sheet stitched sets Up to 50 sheets can comprise each stitched set. The wire supply provides up to 32,000 staples. XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE...
Page 33: Customer-Changeable Unit (Ccu)
A changeout cart is used to remove a CCU from the printer and to transport a CCU to the printer or to another area. Because of the physical weight of the CCU, the cart is required to change colored dry ink.
Page 34: Bypass Transport Option
The bypass transport fits into tray 1 of the dual stacker. With the bypass transport, sheets of paper flow from left to right (when viewed from the front of the printer), leading from the long edge of each sheet. You can configure the output module to run with or without the bypass transport.
Page 35: Interface With Third-Party Devices
Third-party finishing devices It is important to note that while the bypass transport option provides you with an interface between your DocuPrint 92C IPS and your finishing accessories, the finishing accessories require their own AC and DC power sources. The power must be independent of your DocuPrint 92C IPS.
Page 36 PRINTER COMPONENTS AND OPTIONS 3-10 Your Xerox DocuPrint 92C and third-party finishing devices interface on several different levels: • The IPS requires information about the finishing devices to store in its non-volatile memory (NVM). • The finishing device information is grouped into a personality profile for each device.
Page 37: Preparing For Installation
Xerox responsibilities XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE 4Preparing for installation This chapter assists you in preparing for the installation of your Xerox DocuPrint Model 92C IPS. Preparing for installation is a responsibility shared by personnel at your site and Xerox. Your service representatives are available to discuss installation issues and to assist you in completing the site installation tasks.
Page 38: Customer Responsibilities
— Create default input and output configurations for your system — Install the DocuPrint system. • Training — Provide initial operator training — Provide information and assistance in registering for Xerox Customer Education classes or obtaining tutorials. • Service — Review preventive maintenance schedules and service call procedures —...
Page 39 — Set up the operator training schedules. • Applications — Work with your Xerox system analyst to determine requirements for the initial applications — In a mixed environment, where there is a variety of printing systems, discuss print quality differences with your service representative.
Page 40: Installation Planning Checklist
800-327-9753; see Appendix B (U.S. only) Appendix B Customer and Xerox ________ Xerox Sales rep. Customer and Xerox ________ Chapters 4, 5 and Customer XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE Date completed ________ ________ ________ ________ ________ ________ ________...
Page 41 Have test jobs ready to run. Provide stocks needed for default input configuration Provide parameters needed to configure PSF for connectivity to the IPS printer. XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE Table 4-1. DocuPrint Model 92C IPS installation planning checklist (continued) Reference...
Page 42 DocuPrint Model 92C IPS installation planning checklist (continued) Reference Responsibility Appendix B Customer Appendix A Customer Guide to Customer and Xerox ________ Performing Routine Maintenance Customer Xerox XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE Date completed ________ ________ ________ ________...
Page 43: Connectivity Requirements
Terminators (if necessary, due to location on channel). For your convenience, it is possible to order the bus and tag cables for the printer through Xerox on a purchase-only basis. Contact your Xerox sales representative for current pricing and order information.
Page 44 PREPARING FOR INSTALLATION XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE...
Page 45: Power Requirements
Sun Ultra 60 printer controller 100 to 240 VAC Sun Ultra 2 printer controller Sun Ultra 60 printer controller 100 to 240 VAC XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE 5Controller specifications and This chapter provides power and space requirements for your DocuPrint Model 92C IPS printer controller.
Page 46: Outlet Configurations
Warning: To reduce the risk of electrical shock, do not plug components into any other type of power system. Contract your facilities manager or a qualified electrician if you are not sure what type of power is supplied to your work area. XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE Ä...
Page 47: Environmental Specifications
Environmental specifications Space requirements Printer controller placement XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE CONTROLLER SPECIFICATIONS AND REQUIREMENTS Heat dissipation specifications for the DocuPrint Model 92C IPS controller are shown in the table below. For recommended environmental ranges for the printer work area, refer to the “Printer specifications and requirements”...
Page 48 Caution: Do not place a monitor with a base larger than the processor on top of the unit. Do not block any fan or vents on the sides or rear of the processor. XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE...
Page 49 Sun Ultra 60 workstation placement XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE CONTROLLER SPECIFICATIONS AND REQUIREMENTS Following are guidelines for placement of the Sun Ultra 60 workstation components of the printer controller. Figure 5-3. Sun Ultra 60 printer controller hardware...
Page 50 Do not place the processor on its side, or in any other position but the upright, vertical position shown in the previous figure. • Do not place the processor or monitor on top of the printer. XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE...
Page 51 HCU placement (channel-attached systems only) XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE CONTROLLER SPECIFICATIONS AND REQUIREMENTS The following shows the recommended HCU hardware placement, for channel-attached systems. Figure 5-5. IPS HCU hardware (for channel-attached systems) Table...
Page 52: Controller Hardware Specifications And Requirements Summary
200-240 ~ VAC, 1 phase, 50-60 Hz, 2.0 amp, 0.4 KVA 8 lbs. / 100-120/200-240 VAC, 6.6 kg 0.8/0.4 amp, 47-63 Hz XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE Cable lengths Bus and tag cables must conform to host system requirements (200 to 400 ft.
Page 53: Controller Specifications And Requirements
Mouse d=3 in. / 8 cm w=4 in. / 10 cm h=2 in. / 5 cm XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE CONTROLLER SPECIFICATIONS AND REQUIREMENTS Table 5-4. DocuPrint Model 92C IPS printer controller specifications and power requirements (continued)
Page 54 CONTROLLER SPECIFICATIONS AND REQUIREMENTS 5-10 XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE...
Page 55: Environmental Specifications
XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE 6Printer specifications and This chapter provides power and space requirements for your Xerox DocuPrint 92C printer. It also provides printer environmental specifications. For facts about controller power and space requirements, refer to the “Controller specifications and requirements”...
Page 56: Outlet Configurations
Figure 6-1. 60 Hz power configuration NEMA 14-30R 0 to 10 VAC 181 to 220 VAC XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE Range 105 to 127 V 105 to 127 V 0 to 10 V 181 to 220 V...
Page 57: Printer Outlet Voltages—50 Hz
Printer outlet voltages—50 Hz Single phase DELTA configurations Three-phase DELTA configurations XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE PRINTER SPECIFICATIONS AND REQUIREMENTS All power outlets must have a dedicated circuit for each system equipment piece. Make sure each power cord has a separate circuit.
Page 58: Environmental Specifications
Minimum: Maximum: Altitude: Normal: Maximum: Operating: Standby: XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE Range 72° F ± 4° F 22° C ± 2° C 60° F / 15.5 °C 80° F / 26.7° C 45% ±10% Up to 6,000 feet / 1,830 m...
Page 59: Space Requirements
“Space planning guidelines” section of this chapter. Contact your service representative if you have questions not specifically addressed in this guide. The following configurations are available for your Xerox DocuPrint 92C printer: • Standard (two-tray) feeder with dual stacker •...
Page 60 91.8 in / 233 cm 36 in / 91 cm 164 in / 417 cm Back of system Front of system XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE Specifications 91.8 inches / 233 cm 35.7 inches / 91 cm 41 inches / 104 cm 1,454 pounds / 661 kg 164 by 106.5 inches /...
Page 61 Printer with standard (two-tray) feeder and stitcher/stacker 36 in / 91 cm 35.7 in / 91 cm XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE PRINTER SPECIFICATIONS AND REQUIREMENTS The dimensions of the printer with a standard (two-tray) feeder and a stitcher/stacker are as follows:...
Page 62 141.1 in / 290 cm 36 in / 91 cm 186 in / 473 cm Back of system Front of system XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE Specifications 114.1 inches / 290 cm 35.7 inches / 91 cm 41 inches / 104 cm 1,742 pounds / 792 kg 186 inches by 106.5 inches /...
Page 63 34.8 in / 88.4 cm 36 in / 91 cm 35.7 in / 91 cm XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE PRINTER SPECIFICATIONS AND REQUIREMENTS The dimensions of the printer with a high-capacity feeder and a stitcher/stacker are as follows:...
Page 64: Ccu Changeout Cart
CCU. Note: If there is more than one laser printer at your site, it may not be necessary to have one cart per CCU. Consult with your site representative for more information.
Page 65: Space Planning Guidelines
Your environment may require you to use shared space between components such as between the printer and another Xerox printing system. You can share the 36-inch / 91.4 cm clearance space around each component, as long as you follow these rules: •...
Page 66 36 in / Operator Area 91.4 cm 166 in / 422 cm Printer Operator area General service area XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE 24 in / 81 cm 35.7 in / 88 cm 177 in / 449.6 cm 36 in / 91.4 cm...
Page 67 Face-to-face shared space XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE PRINTER SPECIFICATIONS AND REQUIREMENTS The following figure shows the two printers facing each other. The printers share 12 inches / 30.5 cm of the general service space, but not the exclusive operator area in front of each printer. Therefore, the printers should be separated by 24 inches / 61 cm, plus 24 inches/ 61 cm, plus 12 inches / 30.5 cm.
Page 68 Between them is 60 inches / 152.4 cm of space. This allows for 24 inches / 61 cm of operator space in front of the printer facing toward the other, plus 36 inches / 91.4 cm of service space behind the printer facing away from the other.
Page 69: Floor Leveling
If you do not have the leveling kit (the printer in its initial location did not require it), and you need one to level the printer in a new location, contact your Xerox site representative to obtain one.
Page 70 2. Find that number (or the next higher number) in the turning radius table and read across to the corresponding minimum value for Passage B, depending on the type of turn the equipment must negotiate. XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE...
Page 71 39 inches / 99.1 cm 40 inches / 101.6 cm 41 inches / 104.1 cm 42 inches / 106.7 cm XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE PRINTER SPECIFICATIONS AND REQUIREMENTS The following table contains turning requirements for the printer. Table 6-7.
Page 72: Printer Hardware Specifications And Requirements Summary
130 lbs. / 59 kg 35 lbs. / 16 kg XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE Power requirements 60 Hz and 50 Hz: 5.5 KVA max. (operating mode) Same as standard (two- tray) feeder and dual stacker configuration, above.
Page 73: Space Planning Templates
Space planning templates XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE PRINTER SPECIFICATIONS AND REQUIREMENTS The dimensions and space requirements for your printer components are provided earlier in this chapter. The space planning templates are designed to simplify the space planning process by helping you to create a floor plan for your base components, particularly if you have shared clearance space.
Page 74 PRINTER SPECIFICATIONS AND REQUIREMENTS 6-20 XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE...
Page 75 PRINTER SPECIFICATIONS AND REQUIREMENTS XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE 6-21...
Page 76 PRINTER SPECIFICATIONS AND REQUIREMENTS 6-22 XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE...
Page 77 GRID PATTERN 1/4 inch represents one foot 14 15 16 17 18 19 9 10 11 12 13 20 21 22 23 24 25 26 27 28...
Page 79: System Connections
Model 92C IPS system. It also provides information about channel- attaching your IPS printer. To ensure all of your cable requirements are met, it is important to work with your Xerox representative. Cable lengths are important considerations in planning your layout, as components can be separated only up to the length of the data interface cables that connect them.
Page 80: Cable Locations
The following diagrams show those locations (marked with an X). All power cords attach to the back of the printer. Listed below are the distances of the printer power cord attachments from the left end of the printer as you face it.
Page 81 XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE For further information regarding IBM channel connections, refer to the following IBM manuals: • IBM System 360 and System 370 Input-output Interface Channel to Control Unit OEM Information (#GA22-6974-3825) • Page Printer Product Description (#G544-3482) •...
Page 82 SYSTEM CONNECTIONS XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE...
Page 83: Installation
IPS components. The steps in the installation process typically occur in the following order: 1. Xerox personnel install all IPS hardware and options at your site. This process takes approximately 24 hours if all of the necessary connectors are in place.
Page 84: Your Responsibilities
INSTALLATION Your responsibilities Xerox is responsible for the physical installation of the printer components and for loading the software and applications. You have the general site responsibility of ensuring that the right personnel, supplies, and network information are available. At the time of installation, you should do the following: •...
Page 85: Defining The Ips Printer To The Host
“Loading the IPS software license text stream”). This license is enabled by entering a 20-character authorization text string at the printer controller keyboard. Your Xerox service representative obtains this license text string for you and enters it when your IPS is installed.
Page 86: Ongoing Maintenance
INSTALLATION Ongoing maintenance Routine maintenance Meter reading and reporting After the installation of your Xerox DocuPrint IPS, there are a few ongoing tasks that must be performed. These tasks may include the following: • Maintaining an adequate inventory of consumable supplies •...
Page 87: A. Supplies
You need to select your paper carefully. If you do not use the proper paper, you increase the probability of paper jams and misfeeds. The stocks you use must meet the specifications set forth by Xerox for operability in the printer. For additional information about paper specifications, refer to Helpful Facts about Paper, delivered with your printer.
Page 88 • Grain long (parallel with the long side of paper). Paper is usually fed into the printer with the long side as the leading edge. When you purchase paper, buy long-grain paper. Make sure the grain is parallel with the long side (long-grain) for the most reliable feeding and stacking.
Page 89: Paper Care
Plan ahead and keep at least a day’s supply of paper in the same area as the printer to allow environmental stabilization prior to printing. For more detailed information on paper for Xerox printers, refer to Helpful Facts about Paper, provided with your printer. Figure A-1.
Page 90 Recommended temperature and humidity for paper storage Because temperature and humidity affect paper performance in the printer, you need to condition paper before using it. To do this, store paper for a specified length of time in the same type of environment as your printer.
Page 91 XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE Use the following chart to determine the length of time needed to condition stacked cartons of paper. Note: The numbers in the top two rows indicate the temperature difference between the storage area and the operating environment, not actual room temperatures.
Page 92: Other Supplies
You should keep at least one extra cartridge on hand at all times. The disposable cartridges are easily changed with no mess. The consumption rate of Xerox dry ink is approximately one cartridge per 30,000 pages for black dry ink and 86,500 pages for colored dry ink.
Page 93: Stitcher Wire
Stitcher wire Diskettes Tapes XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE For colored inks, use the color developer specified for each color in the table below: Table A-2. Developers for use with colored inks Ink color Use developer Part number...
Page 94: Fonts
Additional fonts may be ordered from your local Xerox Font Center. Custom fonts and graphic images such as company logos and signatures can be digitized by the Xerox Font Center for use on your printer. Fonts are received on a diskette from your local Xerox Font Center.
Page 95: Consumable Supplies Tables
250 sheets each of buff, gray, goldenrod, and ivory. XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE A number of supplies are available from Xerox for your DocuPrint printer. Use the following tables to help determine your supply needs.
Page 96 10 Series Dual Purpose Paper, 3-hole 10 Series Dual Purpose Paper, 3-hole* 10 Series Dual Purpose Paper 10 Series Smooth 10 Series Smooth 4024 Dual Purpose, reinforced 3-hole* XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE Part number 3R3074 3R3090 3R3054 3R3070...
Page 97 Stocks list for DocuPrint Model 92C printer (continued) Description Xerox transparencies are packaged 100 sheets to a box. Clear, with a white strip on the edge Clear, high speed, with paper backing Xerox labels are packaged 100 sheets to a box.
Page 98: Complete Supplies List—Model 92C Printer
6R842 3/carton 8R983 2/carton 9R01190 109R00314 9R84168 9R88432 9R01189 99P87256 35P2163 XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE Expected yield 180,000 prints/carton 260,000 prints/carton 260,000 prints/carton 260,000 prints/carton 260,000 prints/carton 260,000 prints/carton 260,000 prints/carton 260,000 prints/carton 260,000 prints/carton 260,000 prints/carton...
Page 99 Waste Dry ink waste container (Model 92C) containers Developer waste container (Model 92C) Stitcher wire Packaged one reel per box. XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE Table A-4. Complete supplies list for DocuPrint Model 92C Part Items/ number carton...
Page 100: Ordering Supplies
The consumable supplies table, above, contains a list of Xerox supplies available for the printer. It is important that you check your supplies regularly and order before you run out.
Page 101 SUPPLIES The following table is a checklist you can use to keep track of the supplies you order. XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE A-15...
Page 102: Supplies Checklist
Paper Transparencies, labels, and special stocks Dry ink Fuser lubricant Diskettes Stitcher wire Cartridge tapes Cleaning supplies A-16 Table A-5. Supplies checklist for DocuPrint Model 92C printer Quantity XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE Date to order Date ordered...
Page 103: B. Xerox Support Services
Xerox Customer Service Support Center XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE BXerox support services Xerox provides many services in support of your laser printing system. This appendix contains information on the following services: • Xerox Customer Service Support Center •...
Page 104: Xerox Printing Systems Customer Support Center
Xerox support personnel may use the Sixth Sense feature to access controller information via modem from a remote location.
Page 105: Xerox Customer Documentation Catalog
XDSS will also send you a Xerox Customer Documentation Catalog free of charge upon request. To order documents or request a Xerox Customer Documentation Catalog, call XDSS at 1-800-327-9753, between the hours of 6:00 a.m. and 5:00 p.m., Pacific time (U. S.
Page 106: Xerox Customer Education
Customer Education has a web page where you can obtain additional information. Its address is: http://xww.dsss.world.xerox.com/CustomerEd The Xerox Font Center can send you samples and catalogs of the fonts available for your printer. To receive font samples, obtain price information, obtain technical support, or order licensed or custom fonts, call 1-800-445-FONT (-3668) between 6:00 a.m and 5:00 p.m.
Page 107 XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE CRelated publications This book is part of the Xerox DocuPrint IPS Series publication set. Following are related Xerox documents. For a complete list and description of available Xerox documentation, refer to the Xerox Customer Documentation Catalog (publication number 610P17517), or call your service representative.
Page 108 Guide to Advanced Function Presentation Attachment Configuration Handbook AFP IBM Print Services Facility for OS/2 ES 3090/9000 Input/Output Program User’s Guide MVS/ESA Hardware Configuration Definition IBM AIX Print Services Facility/6000: Print Administration VM/ESA Planning and Administration XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE...
Page 109: Mvs Parameters
MVS parameters Printer definitions for MVS versions earlier than 4.1.0 XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE D. DDefining the channel-attached printer to the host This appendix contains some explanations and sample printer parameters for defining a channel-attached IPS printer to your host, in each PSF environment.
Page 110 The following are examples of MVS hardware configuration definition (HCD) printer definition panels. This is the information you use when printing in the PSF/MVS environment for MVS versions 4.1.0 and higher. Figure D-1. MVS hardware configuration definition panels XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE...
Page 111 XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE DEFINING THE CHANNEL-ATTACHED PRINTER TO THE HOST For further information on defining your printer, refer to the following IBM documentation. • ES3090/9000 Input/Output Program User’s Guide (#GC38- 0095) • Chapter 5, “How to define, modify, or view a configuration” in...
Page 112: Os/2 Procedures
Attachment Settings window, select or enter the channel address. 8. In the “Control Unit Address” field on the Channel Attachment Settings window, enter the two-digit address for the control unit. XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE 4635 IPS C:\PSF2\SYSTEM\ 300 PEL...
Page 113: Aix Procedures
AIX procedures PSF/6000 InfoPrint Manager XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE DEFINING THE CHANNEL-ATTACHED PRINTER TO THE HOST 9. In the “Form Definition” field on the Channel Attachment Settings window, use the default form destination, unless one is defined by the application.
Page 114: Vm Sample Definitions
// EXTENT ,SYSWK6 // DLBL IMSYS ‘IMSYS’ // EXTENT ,SYSWK6 LIBDEF *,SEARCH=(IMSYS.AFP300, IMSYS2.PAGELIB,IMSYS2.PARMLIB,IMSYS.PRSABC, IMSYS.PR$ADA,IMSYS.PR$ADB,IMSYS.PR$DY8, IMSYS2.COMPAREX,IMSYS2.FONT,IMSYS2.FORMLIB, PRD2.AFP,IMSYS.PROD,PRD2.AFP240,PRD2.AFP300 // EXEC APTBMIEP,SIZE=APTBMIEP X3820 PRINTDEV BUFNO=10 CHARS=GT12 CKPTPAGE=100 DATACK=BLKCHAR, FONTPR=NO, LOGDEST=LOCAL, MRKFRM=NO, NOTIFY=YES, PIMSG=(YES,0), SETUP=FORMS, SPBUFFER=8 PAGEDEF=VO6683, FORMDEF=AUTO, UNIT=630 XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE...
Page 115: E. Defining The Printer To The Host: Tcp/Ip Attachment
MVS or OS/390 parameters Software prerequisites – MVS Network configurations – MVS XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE EDefining the printer to the host: TCP/IP attachment This appendix contains instructions, prerequisites, and some sample printer parameters for defining your TCP/IP-attached IPS printer to your host, in each PSF environment.
Page 116: Configure The Ips Printer For Tcp/Ip At The Gui
The JES2 PROC has a DD statement (normally HASPPARM), which points to the initialization dataset. (The location of this statement is ‘SYS1.PARMLIB(JES2PARM);’ however, you should always verify the location on your own system.) XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE...
Page 117 None Name of FSS XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE DEFINING THE PRINTER TO THE HOST: TCP/IP ATTACHMENT 2.Enter the following required commands in the JES2 initialization dataset to define the PSF functional subsystem (FSS): •...
Page 118 SYS1.SAMPLIB (member JES3IN00); however, you should verify your location by looking at the JES3 procedure. 2. Enter the following required commands in the JES3 initialization deck to define the PSF functional subsystem (FSS): XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE Your value...
Page 119 BURST Installation preferences COPYMARK Installation preferences XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE DEFINING THE PRINTER TO THE HOST: TCP/IP ATTACHMENT • One FSSDEF statement for each PSF functional subsystem • One DEVICE statement for each functional subsystem application (FSA) under control of the FSS.
Page 120 Note: The WS parameter CL specifies that datasets with the same class as the WS parameter should be selected. D specifies that only datasets with the same destination as the DGROUP parameter should be selected. F specifies that JES3 XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE Your value...
Page 121: Configure The Printer In Psf/Mvs
FORMDEF None Installation preferences XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE DEFINING THE PRINTER TO THE HOST: TCP/IP ATTACHMENT is to pass the forms value specified on the DD or OUTPUT JCL statement to the FSA. Following is an example of the JES3 initialization dataset required commands: Table E-4.JES3 initialization dataset commands example...
Page 122 Name of font library DD statement. Fonts in this library must match the resolution the IPS is using. Name of default Page Definition for IPS printer Name of Page Definition library DD statement XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE Your value...
Page 123 No Setup Installation messages preferences issued RELINTV RELMODE None XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE DEFINING THE PRINTER TO THE HOST: TCP/IP ATTACHMENT Table E-5.PSF/MVS PRINTDEV statement parameters (continued) Range of acceptable values Comments (YES,nnn) or YES: Specifies error...
Page 124 TCP/IP address space. If this parameter is not coded, PSF uses the default name, TCPIP. (For a full description of the PARM parameter, refer to Print Services Facility/MVS: Diagnosis Guide and Reference.) XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE Your value...
Page 125: Configure Tcp/Ip For Mvs For The Printer
//PRT277 CNTL //PRT277 PRINTDEV // PRT277 ENDCNTL 5. Configure TCP/IP for MVS for the printer XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE DEFINING THE PRINTER TO THE HOST: TCP/IP ATTACHMENT Table E-6. PSF/MVS PRINTDEV statement example FONTDD=*.FONT01, /* FONT LIBRARY DD */ OVLYDD=*.OLAY01, /* OVERLAY LIBRARY DD */...
Page 126 TCP/IP address space. If this parameter is not coded, PSF uses the default name, TCPIP. (For a full description of the PARM parameter, refer to Print Services Facility/MVS: Diagnosis Guide and Reference.) XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE Your value...
Page 127 ENDKEEPALIVEOPTIONS GATEWAY ; * Network First hop DEFAULTNET XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE DEFINING THE PRINTER TO THE HOST: TCP/IP ATTACHMENT • KEEPALIVEOPTIONS statement: PSF relies on TCP to detect when a connection with the IPS printer is no longer usable.
Page 128: Test The Printer To Ensure It Prints From The Mvs Host
• Ping the printer from your MVS host to ensure MVS can establish a connection with the TCP/IP-attached IPS. To ping the printer from the MVS host, enter one of the following commands: • In JES3: At your MVS host, enter the following command at the...
Page 129 XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE DEFINING THE PRINTER TO THE HOST: TCP/IP ATTACHMENT If the ping is unsuccessful: Table E-10.Example of an unsuccessful ping – MVS EZA0458I Ping V3R1: Pinging host 9.99.12.33 (Use ATTN to interrupt) EZA 0464I PING: Ping #1 timed out If your ping is not successful, verify the following: •...
Page 130: Correcting For Printer Performance Issues - Mvs
TCP/IP for MVS and in the IPS printer may improve printer performance. If the printer is on a LAN that also has a large number of other devices attached to it, the high levels of traffic on the LAN can cause printer speed degradation.
Page 131: References
MVS/ESA SP V5 JES3 Initialization and Tuning Guide MVS/ESA SP V5 JES3 Initialization and Tuning Reference XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE DEFINING THE PRINTER TO THE HOST: TCP/IP ATTACHMENT The following IBM documents, referenced in this section, can provide additional information on MVS-to-IPDS printer connectivity.
Page 132: As/400 Parameters
Note: There may be printer performance and throughput implications with some of these configurations. It is recommended that your network management group be involved with planning this installation. XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE Product option *BASE...
Page 133: Configuration Steps - As/400
1. Configure the IPS printer for TCP/IP at the GUI 2. Create the PSF/400 configuration XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE DEFINING THE PRINTER TO THE HOST: TCP/IP ATTACHMENT Follow these steps to configure your AS/400 to print to an IPS printer connected to the LAN, using TCP/IP.
Page 134: Create The Printer Device Description
Table F-16 shows printer description parameters for OS/ 400 with V3R7 installed. • Table F-17 shows parameters for OS/400 with V3R2 installed. For parameters with * beside them, refer to the configuration worksheet, earlier in this section. XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE...
Page 135 OBJECT... LIBRARY... OBJECT TYPE... DATA TRANSFORM PROGRAM... LIBRARY... TEXT ‘DESCRIPTION’... XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE DEFINING THE PRINTER TO THE HOST: TCP/IP ATTACHMENT Table E-16.Create Device Description (Printer) screen for OS/400 with V3R7 installed > XEROXIPS > *LAN >...
Page 136: Test The Printer Connection
*NETATR *NONE *BLANK Test the printer by one of the following methods to ensure AS/400 is able to make a connection with the IPS printer: • Send a job from the host through PSF to print on the IPS. (Refer to your IPS Guide to Configuring and Managing the System for printing procedures.)
Page 137 No response from host within 10 seconds for connection verification 4. No response from host within 10 seconds for connection verification 5. Connection verification statistics: XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE DEFINING THE PRINTER TO THE HOST: TCP/IP ATTACHMENT If the ping is successful: Table E-18.Example of a successful ping –...
Page 138: Correcting For Printer Performance Issues - As/400
Table E-20.Components to check for printer performance problems If the printer is on a LAN that also has a large number of other devices attached to it, the high levels of traffic on the LAN can cause printer speed degradation. Consider moving the printer to a LAN that does not have so much activity on it.
Page 139: Aix Parameters
AIX parameters Software prerequisites – AIX Program temporary fixes (PTFs) XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE DEFINING THE PRINTER TO THE HOST: TCP/IP ATTACHMENT This section provides information on using TCP/IP to attach an IPS printer to an RS/6000 in an AIX environment using PSF/6000 or InfoPrint Manager.
Page 140: Network Configurations - Aix
This section provides references to detailed information on configuring an IBM RS/6000 system to print to an IPS printer using a TCP/IP LAN connection. For detailed information on configuring PSF/6000 so it recognizes your TCP/IP-attached printer, refer to Part 2, “Installing and...
Page 141: References
Frank Waters; Prentice Hall, 1996 The AIX Survival Guide by Andreas Siegert; Addison Wesley, 1996 XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE DEFINING THE PRINTER TO THE HOST: TCP/IP ATTACHMENT The following documents can provide additional information on AIX- to-IPDS printer connectivity.
Page 142: Os/2 Parameters
LAN devices such as routers. Note: There may be printer performance and throughput implications with some of these configurations. It is recommended that your network management group be involved with planning this installation. XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE...
Page 143: Configuration Steps - Os/2
DEFINING THE PRINTER TO THE HOST: TCP/IP ATTACHMENT This section describes the process for configuring a TCP/IP attached host computer with OS/2 to print on an IPDS printer such as your IPS. The following worksheet will help you in planning the IPS installation.
Page 144: Define The Printer To Psf/2
If TCP/IP does not appear an available attachment type, either TCP/IP for OS/2 or the TCP/IP Attachment Support in PSF/2 has not been installed. (Refer to the appropriate IBM installation guide for details.) XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE Your value TCP/IP...
Page 145: Define A Psf/2 Print Queue For The Printer (Optional
Xerox IPS printer Resolution installation 4. Define a PSF/2 print queue for the printer (optional) XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE DEFINING THE PRINTER TO THE HOST: TCP/IP ATTACHMENT Table E-24.Parameters for PSF/2 device definition (continued) Comments Address configured...
Page 146: Test The Printer Connection In
Desktop, do not attempt to alter its values using its Settings dialog. Return to the PSF/f2 folder and the Control Panel to make any necessary changes. Test the printer by one of the following methods to ensure OS/2 can make a connection with it: •...
Page 147 EZA0458I Ping V3R1: Pinging host 9.99.12.33 EZA0463I PING: Ping #1 timed out. Printing a test job XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE DEFINING THE PRINTER TO THE HOST: TCP/IP ATTACHMENT If PSF/2 output for the IPS prints elsewhere: Follow these steps to determine whether the IP address of the printer is unique.
Page 148: Correcting For Printer Performance Issues - Os/2
If the entry never changes status to “Printing,” either the queue or the entry is in a “Hold” state, or OS/2 is unable to contact the printer to initiate printing. If the entry enters a “Printing” state then disappears, but no output was produced on the IPS printer, check to see if the output was printed elsewhere.
Page 149: References - Os/2
TCP/IP for OS/2 and the IPS printer may improve printer performance. If the printer is on a LAN that also has a large number of other devices attached to it, the high levels of traffic on the LAN can cause printer speed degradation.
Page 150 DEFINING THE PRINTER TO THE HOST: TCP/IP ATTACHMENT E-36 XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE...
Page 151: Glossary
XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE This glossary contains a list of terms for working with the Xerox DocuPrint Model 92C printing system, and a definition of each. Paper size measuring 297 by 420 mm.
Page 152 (2) for adjusting differences of speed between devices, or between a device and a communicating facility. Optional module that moves paper from the printer to a finishing device. XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE...
Page 153 (cpi) client software client workstation command XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE byte Fixed number of bits (in data processing, usually 8) operated upon as a unit. A byte may represent a character, a machine instruction, or some other logical unit of information.
Page 154 In data communications, the rate at which a channel carries data, measured in bps (bits per second). Preservation of data on various media (e.g., tape, disks, magnetic bubble memory, etc.). XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE...
Page 155 Document Feeding and Finishing Architecture. Software that enables third-party feeding and finishing devices to be attached to a Xerox printer to perform pre- and post-processing functions (such as roll-feeding, saddle-stitching, booklet-making, etc.) Programs used to diagnose problems within the system or to help service personnel pinpoint the source of such problems.
Page 156 Any optional output finishing solution, for example, the stitcher/ stacker. Permanent programs stored in read-only memory (ROM). Disk drive that is mounted within a computer and is not removable. Font containing characters with fixed spacing. XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE...
Page 157 XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE Font set in which every character cell has the same width. In reference to character sets, this term describes typefaces in which all character cells are of equal width. Monospaced as opposed to proportional spaced.
Page 158 Process of installing system hardware and software. Also the process of converting a design into an actual working system. The number of pages (one side) a printer can print during the space of one minute. Used interchangeably with pages per minute (ppm).
Page 159 (LED) line feed Local Area Network (LAN) logical page XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE job descriptor library. Collection of compiled job descriptions. See also JSL. Print data and attributes required for processing and printing a document.
Page 160 Station, terminal, or computer that performs some control operation and influences the operation of the network as a whole. Source file converted into machine language (binary code). XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE...
Page 161 Combination of hardware and operating system software. portrait page orientation Orientation of print lines or the top of an illustration parallel to the short edge of the paper. XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE GLOSSARY-11...
Page 162 Binary data, usually consisting of dots arranged in scan lines, according to the print order. The creation of a bitmap image of a page for printing. Raster output scanner. A motor–driven laser scanning system. Solid-state memory for programs. It cannot be rewritten. XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE...
Page 163 XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE A small electromagnet that reads, writes, and erases data in the form of magnetic dots on the surface of an external storage medium, such as a magnetic disk.
Page 164 See also operating system. UNIX Operating system for computers, usually working in a network environment. UNIX consists of a hierarchical system of commands, shells, files, and directories. See also operating system. XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE...
Page 165 XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE System for gathering input from a user and presenting data to the user. Page area selected by a forms designer for printing. Alternate names for the printer which allow different sets of default attributes to be applied to submitted jobs.
Page 166 GLOSSARY GLOSSARY-16 XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE...
Page 167: Index
1-4, 3-8–3-10 power requirements, 6-18 cables bus, 2-10 IBM channel, 7-2 locations, 7-2 XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE power, 6-2 tag, 2-10 cartridge tape drive, 2-3, 2-6, 5-8 CCU changeout cart, 6-5, 6-10 CD-ROM drive, 2-3, 2-5...
Page 168 6-15 license, software, 8-3 maintenance ongoing, 8-4 routine, 8-4 mechanical interface, 3-9 meter, billing reading, 8-4 reporting, 8-4 monitor, 2-3, 5-8 mouse, 2-4, 2-8, 5-9 channel attachment, D-1–D-3 TCP/IP connection, E-1–E-17 XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE...
Page 169 6-6 HCF, 6-8 HCF and stitcher/stacker, 6-9 stitcher/stacker, 6-7 installation, 8-1 maintenance, 8-4 performance XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE AS/400, E-24 MVS, E-16 OS/2, E-34–E-35 pinging AS/400, E-22–E-24 MVS, E-14–E-15 OS/2, E-32–E-33 power requirements, 5-8–5-9, 6-18...
Page 170 1-4, 3-5 HCF, 3-4 stitcher/stacker, 1-4, 3-6 feeder, 1-3 input, 1-3 locations, 3-2 trimming, 3-8 turning radius, 6-15–6-17 UltraSPARC workstation, see Sun workstations United States/Canada, 5-2 vertical clearance, 6-5 VM, D-6 XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE...
Page 171 Xerox Documentation and Software Services (XDSS), B-3 Xerox Font Center, B-4 Xerox Printing Systems Customer Support Center, Xerox Product Safety, iv Xerox related documents, C-1 Xerox responsibilities, 4-1–4-2, 8-2 Xerox Supply Center, A-14 XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE INDEX INDEX-5...
Page 172 INDEX INDEX-6 XEROX DOCUPRINT 92C IPS INSTALLATION PLANNING GUIDE...

Xerox DocuPrint 92C Installation Planning Manual

Printer Specifications and Requirements

Printer Components and Options

Product Overview

Controller Components and Options

Preparing for Installation

Controller Specifications and Requirements

System Connections

Installation

A. Supplies

B. Xerox Support Services

E. Defining the Printer to the Host: TCP/IP Attachment

Glossary

Index

Quick Links

Need help?

Questions and answers

Related Manuals for Xerox DocuPrint 92C

Summary of Contents for Xerox DocuPrint 92C

Table of Contents