Xerox 4850 Installation Planning Manual page 185

Defining the printer to the host: TCP/IP attachment
Table F-5. PSF/MVS PRINTDEV statement parameters (Continued)
Item
description Default
OBJCONDD
OVLYDD None
PAGEDEF None
PDEFDD None
PIMSG (YES,16)
PORTNO 5001
PSEGDD None
F-11
Range of
Source of acceptable
value values
N/A
Installation (YES,nnn) or
preferences (NO,nnn)
Controller Valid TCP/IP port
Set Option number between
command 5001 and 32767
Comments
Not applicable for TCP/
IP-attached printers
Name of font library DD
statement. Fonts in this
library must match the
resolution the printer is
using.
Name of default Page
Definition for printer
Name of Page Definition
library DD statement
YES: Specifies error
messages are always
printed.
nnn: Specifies maximum
number of messages
groups generated before
job is purged from spool.
A value of 0 causes
printer to print
continuously, regardless
of number of errors.
Applicable only to TCP/IP
printers. (Ensure the
chosen port number is
not in TCP/IP list of
reserved port numbers.)
Name of Page Segment
library DD statement. For
best results, the images
in page segments in this
library should match the
resolution the printer is
using.
Installation Planning Guide
Your
value