Printer Configurations - Xerox 4850 Installation Planning Manual

CCU changeout
cart

Printer configurations

Installation Planning Guide
The cart is used to remove and install the customer changeable
unit (CCU). The CCU consists of the color developer housing
and the dry ink bottle. Because the CCU is heavy, the user will
need the cart to make the change.
The carts also serve as storage devices for the CCUs that are
not currently in use. For example, if you use both the red and
blue dry inks in your operation, one CCU is always out of the
machine in storage on the cart while the other CCU is installed.
Figure 3-4. CCU on cart
NOTE: You should have a cart for each CCU so that a cart is
always available to remove the CCU that is installed in the
system. You may not need a cart for each CCU if only one color
is used or if there is more than one color printer at your site.
Consult your site representative for more details.
The NPS/IPS may be configured with a high-capacity feeder, a
dual stacker, a wire stitcher/stacker, or a bypass transport with a
dual stacker.
Printer components and options
3-7